Page 16 / 61
Scroll up to view Page 11 - 15
IPv6 Configuration
The IPv6 (Internet Protocol version 6) section is where you configure your IPv6
Connection type.
IPv6 Connection Type
There are several connection types to choose from: Static IPv6, Autoconfiguration, 6RD
and Link-local only. If you are unsure of your connection method, please contact your
IPv6 Internet Service Provider.
Static IPv6 Mode
This mode is used when your ISP provides you with a set IPv6 addresses that does not
change. The IPv6 information is manually entered in your IPv6 configuration settings.
You must enter the IPv6 address, Subnet Prefix Length, Default Gateway, Primary DNS
Server and Secondary DNS Server. Your ISP provides you with all this information.
Page 17 / 61
6RD Mode
In the 6RD mode, no additional configuration is necessary.
Link-local Mode
The Link-local address is used by nodes and routers when communicating with
neighboring nodes on the same link. This mode enables IPv6-capable devices to
communicate with each other on the LAN side.
Page 18 / 61
Status
The pages in the status section provide you general information about the operational
status of your device.
Status
The System status section allows you to monitor the current status of your
modem/router: the UP time, hardware information, serial number as well as firmware
version information is displayed here. The page also shows extensive information
concerning the ADSL status and current settings.
Page 19 / 61
Statistics
You can view statistics on the processing of IP packets on the networking interfaces. You
will not typically need to view this data, but you may find it helpful when working with
your ISP to diagnose network and Internet data transmission problems. To display
statistics for
any new data, click “Refresh”.
DHCP List
This page shows all DHCP clients (LAN PCs) currently connected to your network. The
table shows the assigned IP address, MAC address and expiration time for each DHCP
leased client.
Page 20 / 61
Diagnostics
The Diagnostics page allows you to test the current configuration.
Click ‘Start’ to let the modem router perform several tasks to verify if the connection is
operational.
19216811.live