Page 16 / 60
Scroll up to view Page 11 - 15
16
Device Status
View the Broadband router’s current configuration settings. Device Status displays
the configuration settings you’ve configured in the Wizard / Basic Settings /
Wireless Settings section
Page 17 / 60
17
Internet Status
This page displays whether the WAN port is connected to a Cable/DSL connection.
It also displays the router’s WAN IP address, Subnet Mask, and ISP Gateway as
well as MAC address, the Primary DNS. Press
Renew
button to renew your WAN
IP address.
Page 18 / 60
18
DHCP Client Status
DHCP
This page shows all DHCP clients (LAN PCs) currently connected to your
network. The table shows the assigned IP address, MAC address and expiration
time for each DHCP leased client. Use the Refresh button to update the available
information.
You can check
Enable Static DHCP IP
. It is possible to add more static DHCP IPs.
They are listed in the table
Current Static DHCP Table
. IP can be deleted at will
from the table.
Click
apply
button to save the changed configuration.
Page 19 / 60
19
WL-303/WL-306/WL-312 Log
View the operation
log of WL-303/WL-306/WL-312
. This page shows the current
system log of the Broadband router. It displays any event occurred after system start
up. At the bottom of the page, the system log can be saved
<Save>
to a local file for
further processing or the system log can be cleared
<Clear>
or it can be refreshed
<Refresh>
to get the most updated information. When the system is powered down,
the system log will disappear if not saved to a local file.
Page 20 / 60
20
WL-303/WL-306/WL-312 Statistics
Shows the counters of packets sent and received on WAN, LAN & WLAN.
19216811.live