19216811.live21
A
GE
21
-
MAC
Address
: The Ethernet ID (MAC address) of the wireless client.
-
IP
Address
: The LAN-side IP address of the client.
-
Mode
: The transmission standard being used by the client. Values are
11a, 11b, 11g, or 11n for 802.11a, 802.11b, 802.11g, or 802.11n
respectively.
-
Rate
: The actual transmission rate of the client in megabits per second.
-
Signal
: This is a relative measure of signal quality. The value is
expressed as a percentage of theoretical best quality. Signal quality can
be reduced by distance, by interference from other radio-frequency
sources (such as cordless telephones or neighboring wireless networks),
and by obstacles between the router and the wireless device.
WISH
The WISH Sessions page displays full details of active local wireless sessions
through your router when WISH has been enabled. A WISH session is a
conversation between a program or application on a wirelessly connected
LAN-side computer and another computer, however connected.
-
Originator
: The IP address and, where appropriate, port number of the
computer that originated a network connection.
-
Target
: The IP address and, where appropriate, port number of the
computer to which a network connection has been made.
-
Protocol
: The communications protocol used for the conversation.
-
State
: State for sessions that use the TCP protocol.
o
NO
: None -- This entry is used as a placeholder for a future
connection that may occur.
o
SS
: SYN Sent -- One of the systems is attempting to start a
connection.
o
EST: Established -- the connection is passing data.
o
FW
: FIN Wait -- The client system has requested that the connection
be stopped.
o
CW
: Close Wait -- the server system has requested that the
connection be stopped.
o
TW
: Time Wait -- Waiting for a short time while a connection that was
in FIN Wait is fully closed.