Page 11 / 74 Scroll up to view Page 6 - 10
11
A
GE
11
-
1
Understanding the Hardware
Hardware Installation
You can place the WL-309 on a desk or other flat surface, or you can mount it on
a wall. For optimal performance, place your Wireless Broadband Router in the
center of your office (or your home) in a location that is away from any potential
source of interference, such as a metal wall or microwave oven. This location
must be close to a power connection and your ADSL/Cable modem.
Plug one end of the Ethernet cable into the LAN port of the device and another
end into your PC/Notebook.
Plug one end of another Ethernet cable to the WAN port of the device and the
other end into you cable/DSL modem (Internet).
Insert the DC-outlet of the power adapter into the port labeled “DC-IN” and the
other end into a power socket on the wall.
Page 12 / 74
12
A
GE
12
IP Address Configuration
This device can be configured as a Bridge/Router or Access Point.
The default IP
address of the device is 192.168.0.1. In order to log into this device, you must first
configure the TCP/IP settings of your PC/Notebook.
1.
In the control panel, double click Network Connections and then double click
on the connection of your Network Interface Card (NIC). You will then see the
following screen.
2.
Select
Internet Protocol (TCP/IP)
and then click on the Properties button.
This will allow you to configure the TCP/IP settings of your PC/Notebook.
Select both [
Obtain an IP address automatically
] and [
Obtain DNS
server address automatically
].
3.
Click on the OK button to close this window, and once again to close LAN
properties window.
Page 13 / 74
13
A
GE
13
2
Internet Connection Wizard
This device offers a quick and simple configuration through the use of a wizard.
This chapter describes how to use the wizard to configure the internet settings.
Please refer to Chapter 6 in order to configure the more advanced features of the
device.
Logging In
To configure the device, open a web browser.
Type
in the address bar and press [Enter].
After connecting to the IP address, the web-browser will display the login page.
Fill in the username and password. The default credentials are shown below:
Click on the
Wizard
button to begin the process.
Username:
admin
Password:
admin
Page 14 / 74
14
A
GE
14
Select your country from the Country list. Select your internet provider. Click
Next.
Depending on the chosen provider, you may need to enter your user name and
password, MAC address or hostname in the following window. After you have
entered the correct information, click
Next
.
Click
APPLY
to complete the configuration.
Page 15 / 74
15
A
GE
15
3 Wi-Fi Protected Setup Wizard
Wi-Fi Protected Setup is a feature that locks the wireless security settings and
prevents the settings from being changed by any new external registrar using its
PIN. Devices can still be added to the wireless network using Wi-Fi Protected
Setup.
Please refer to Chapter 5 in order to configure the more advanced features of the
device
Logging In
Open a web browser and type in the IP address (default:
),
the web-browser will display the login page.
Fill in the username and password. The default credentials are shown below:
Username:
admin
Password:
admin

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top