Page 6 / 59
Scroll up to view Page 1 - 5
6
3 Product Layout
Port
Description
WAN
Connect the cable from you ADSL/Cable modem to this
port
LAN
Connect the cable from your PC’s or network devices
to this port
Power connector
Blinks on traffic for specific LAN PORT
Page 7 / 59
7
Backlabel
The backlabel describes the corresponding LED indications and port functionality
LED
Description
POWER
Lights up when powered ON. Blinks on TEST/RESET
WLAN
Lights up in Blue when WLAN is enabled. Blinks on traffic
LINK/ACTIVY
Blinks on traffic for specific LAN PORT
WPS BUTTON
Press 2 seconds for WPS mode
Press 10 seconds to reset the router
Press 15 Seconds to reset the router to factory defaults.
Page 8 / 59
8
4 Network + System Requirements
To begin using the WL-303/WL-312, make sure you meet the following as
minimum requirements:
•
PC/Notebook.
•
Operating System – Microsoft Windows XP/2000/VISTA
•
1 Free Ethernet port.
•
WiFi card/USB dongle (802.11 b/g/n) – optional.
•
External xDSL (ADSL) or Cable modem with an Ethernet port (RJ-45).
•
PC with a Web-Browser (Internet Explorer, Safari, Firefox, Opera)
•
Ethernet compatible CAT5 cables.
5 WL-303/WL-312 Placement
You can place WL-303/WL-312 on a desk or other flat surface, or you can mount
it on a wall. For optimal performance, place your Wireless Broadband Router in
the center of your office (or your home) in a location that is away from any
potential source of interference, such as a metal wall or microwave oven. This
location must be close to a power connection and your ADSL/Cable modem.
Page 10 / 59
10
7 PC Network Adapter setup (
Windows XP
)
•
Enter [Start Menu]
°
select [Control panel]
°
select [Network].
•
Select [Local Area Connection]) icon=>select [properties]
19216811.live