Page 16 / 61
Scroll up to view Page 11 - 15
Sitecom ADSL2+ Modem DC-227
16
4.1.5 Interface
This page shows the packet and memory statistics for the different interfaces.
Click “Refresh” to update the list.
Page 17 / 61
Please check
www.sitecom.com
for up to date drivers & utilities, manuals and support
17
4.1.6 Statistics
This page shows the statistics for the ADSL line and connection.
Click “Refresh” to update the list.
Page 18 / 61
Sitecom ADSL2+ Modem DC-227
18
5
Run Setup Wizard
•
Click
Wizard
to configure the modem.
•
The
Setup wizard
will now be displayed; check that the modem is connected and
click
Next
.
•
Select your country from the
Country
list.
•
From
Service,
select your internet provider. Click
Next
.
•
Depending on the chosen provider, you may need to enter your user name and
password, or MAC address in the following window. After you have entered the correct
information, click
Next
.
•
Click
APPLY
to complete the configuration.
Page 19 / 61
Please check
www.sitecom.com
for up to date drivers & utilities, manuals and support
19
•
The modem will now save the settings and restart, please wait 120 seconds and you
will be transferred back to the status window. The configuration is complete.
•
Wait for about 10 seconds to allow the modem to (re)connect to the Internet.
Page 20 / 61
Sitecom ADSL2+ Modem DC-227
20
6
Basic Settings
6.1 DNS Settings
This page is used to select the way to obtain the IP addresses of the DNS servers.
Apply Changes
Set new DNS relay configuration. New parameters will take effect after save into flash
memory and reboot the system.
Undo
Discard your changes.
Field
Description
Attain DNS
Automatically
Select this item if you want to use the DNS servers obtained by the WAN
interface via the auto-configuration mechanism.
Set DNS Manually
Select this item to configure up to three DNS IP addresses.
19216811.live