Page 11 / 61
Scroll up to view Page 6 - 10
Please check
www.sitecom.com
for up to date drivers & utilities, manuals and support
11
The Status section allows you to monitor the current status of your modem. You can use the
Status page to monitor; the connection status of the ADSL modem's WAN/LAN interfaces,
the current firmware and hardware version numbers, and information on all DHCP client PCs
currently connected to your network.
Connect
/
Disconnect
The two buttons take effect only when PVC is configured as PPPoE/PPPoA mode.
Click Connect/Disconnect button to connect/disconnect the PPP dial up link.
Page 12 / 61
Sitecom ADSL2+ Modem DC-227
12
4.1.1 LAN Settings
This page shows the current setting of LAN interface. You can set IP address, subnet mask,
and IGMP Snooping for LAN interface in this page.
Fields on this page:
Field
Description
IP Address
The IP address your LAN hosts uses to identify the device’s LAN port.
Subnet Mask
LAN subnet mask.
IGMP Snooping
Enable/disable the IGMP snooping function for the multiple bridged LAN
ports.
Apply Changes
Click to save the setting to the configuration. New parameters will take effect after save
into flash memory and reboot the system.
Undo
Discard your changes.
Page 13 / 61
Please check
www.sitecom.com
for up to date drivers & utilities, manuals and support
13
4.1.2 ARP Settings
This page shows a list of MAC addresses and IP addresses for devices that are/were
connected to the ADSL modem.
Click “Refresh” to update the list.
Page 14 / 61
Sitecom ADSL2+ Modem DC-227
14
4.1.3 DHCP
This page shows a list of assigned IP addresses and MAC addresses for each DHCP leased
client.
Click “Refresh” to update the list.
Page 15 / 61
Please check
www.sitecom.com
for up to date drivers & utilities, manuals and support
15
4.1.4 Route
This page shows a list of learned routes.
Click “Refresh” to update the list.
19216811.live