1. Home
    2. /
  2. Manuals
    3. /
  3. Sierra Wireless
    4. /
  4. AirCard-802S
    5. /
  5. 12
Page 56 / 180 Scroll up to view Page 51 - 55
48
Using Your Device
Block
— Use this to block a computer’s access to the device. You might want to do this if:
●
You don’t recognize a listed computer.
●
You have lots of data to transfer (you want to be the sole user of the bandwidth).
●
You’re approaching the data limit on your account.
Max Wi-Fi users
— You can limit the number of Wi-Fi users (maximum of eight) that can connect to the
device. A smaller number improves performance and security.
Disable Wi-Fi
— This setting specifies when to turn off the Wi-Fi of the device.
●
Always
— Select this value if you always want to use the device in tethered mode and you want to
make sure the device is never broadcasting any Wi-Fi signals.
●
When connected to USB
— Only a computer connected through the micro-USB cable to the device
will be able to use it.
Battery Information and Settings
The battery icon indicates the state of the battery of the device.
The text next to the icon displays additional information, for example, the charging status
(% remaining or % complete). If “Charging paused” is displayed, see “What Do I Do if the Home Page
Displays “Charging paused”?” on page 122.
Tip:
You can also check the battery icon from the Home page, Mini Window, and device LCD.
Battery level is critical. Charge the device immediately. (See “Charging the Device”
on page 12.)
No battery; connected to an electrical outlet (through the AC charger).
Connected to USB. Battery is either charging or is not inserted.
Charging through the AC charger.
Battery is low. Charge the device. (See “Charging the Device” on page 12.)
Battery is charged.
Click the icon to display the Battery Information and Settings window.
When you’re logged in, you can set the behavior for when the device is:
●
Battery or USB powered
. Choose one of the following:
±
Short Range
— This setting improves battery life, at the cost of shorter Wi-Fi range.
±
Long Range
— This setting allows you to use your wireless devices farther from your Overdrive
Pro 3G/4G Mobile Hotspot, at the cost of shorter battery life and the increased
possibility of
interference with/from other nearby WiFi devices.
Page 57 / 180
Using Your Device
49
Using Your Device
●
AC powered
. Choose one of the following:
±
Short Range
— Choose this setting if you have a designated wireless area and you need to
minimize the effect of your network on other networks in the vicinity.
±
Long Range
— This setting allows you to use your wireless devices farther from your
Overdrive Pro 3G/4G Mobile Hotspot but increases the possibility of interference with or
from nearby wireless networks.
Standby (Low Power) Mode
When the device is in standby (low power) mode, the 3G/4G modem radios, the Wi-Fi radio, and
the LCD are off, and the power button
is flashing (approximately every 8 seconds).
When you’re logged in, you can set how soon the device goes into standby mode when no Wi-Fi
users are connected to it (
Standby Timer
).
You can specify different settings for battery power and AC power. (See “Basic Panel” on
page 76.)
Note:
This setting has no effect when the device is connected to a computer through the micro-USB cable.
To exit standby mode:
³
Connect the device to the AC charger or computer through the micro-USB cable.
— or —
Press the power button
.
Internet Connection Information
Note:
Data usage amounts are approximate and should not be used for billing purposes. For accurate
data usage amounts, check with Sprint.
Click the data icon
to display the Internet Connection Information window. The window
displays:
●
Data statistics for the current connection session:
±
Data sent
±
Session duration
±
Data received
±
Total transferred
●
WWAN IP Address
— This is the external IP address of the modem [3G or 4G] (that is, the IP
address of the modem as seen from the Internet).
●
More info
— Click this link to display, when you’re connected to the network, the following
information:
±
WAN DNS Primary
— This is the address of the Internet system used to translate names (for
example, sprint.com) into IP addresses.
Page 58 / 180
50
Using Your Device
±
WAN DNS Secondary
— This is the address of the Internet system used to translate names (for
example, sprint.com) into IP addresses. The secondary DNS is used when there is a problem
with the primary DNS.
±
Default Gateway
— This is the address of the node on the computer network that the network
software uses when an IP address does not match any other routes in the routing table (that is,
when an IP packet’s destination address is outside of the local subnet).
±
WAN MTU size
— This is the size of the largest packet (“Maximum Transmission Unit”) that a
network protocol can transmit.
Viewing and Configuring Detailed Internet Connection Information
When you’re logged in, the Internet Connection Information window displays a table showing data
use:
●
In the current cycle or since you last reset the data usage figures — whichever occurred more
recently. These numbers get automatically reset to 0 on the day selected in the
Starts on day
list.
●
Over the lifetime of the device.
●
By network [3G and 4G], and by sent, received, and total.
From this window you can:
●
Reset the data usage figures for the current billing cycle. (Click
Reset
.)
●
Change the start day of the billing cycle (in the
Starts on day
list).
●
See the number of days left in the cycle.
microSD Card Information and Settings
The text next to the microSD icon (
) indicates whether the card is:
●
Enabled
●
Detected
●
Accessible by all (“shared”) or only the administrator
●
Accessible with or without a password (security)
Click the icon to display the SD Card Information and Settings window. The window displays:
●
The card status (see the list above)
●
Storage capacity of the card, and space available (displayed only if a card is detected)
●
A button to safely eject the card (
Safe-Eject SD Card
; displayed only if a card is detected))
When you’re logged in, you can:
●
Enable or disable the microSD card slot. (See “Enabling the microSD Card Slot” on page 55.)
●
Set up access to the card. (See “Setting Up Access to the microSD Card” on page 55.)
Page 59 / 180
Using Your Device
51
Using Your Device
Sounds Information and Settings
The sounds icon (
) shows whether the device speaker is on.
The device speaker is on.
The device speaker is off.
Click the sounds icon to display the Sounds window. The window displays:
●
Status of the device speaker (on or off).
●
If you’re logged in, check boxes to enable or disable sounds for the following events:
±
Internet connected
— A sound is played when you connect to the Internet.
±
Low battery
— A sound is played when the battery is low. This is useful as a reminder to
charge the device.
±
Internet disconnected
— A sound is played when you lose the connection to the Internet.
±
System alerts
— A sound is played when a system alert occurs. You can then use the
device LCD or the Alerts window to get information about the alert. (See “Alert Information”
on page 46.)
Note:
System alerts include several types of events, for example:
• Critical battery
• Critical temperature
• Software update available
• Network update available
• Routing hardware settings reset
• Device startup failure
±
Wi-Fi user has joined
— A sound is played when a Wi-Fi user connects to your network. This
is useful, for example, to detect an unwelcome Wi-Fi user if you’re the only one using the
device.
±
Enter standby mode
— A sound is played when the device enters standby mode. (See
“Standby (Low Power) Mode” on page 49.)
±
Wi-Fi user has left
— A sound is played when a Wi-Fi user disconnects from your network.
±
Last user has left
— A sound is played when the last Wi-Fi user disconnects from your
network. You can turn the device off if nobody will be using it for awhile.
●
If you’re logged in, for each of the above events, click
to play each corresponding sound.
Tip:
You can also disable all sounds through the mute switch on the device. (See “Mute Switch” on
page 17.) If you’ve enabled the sounds through the home page, but there are no sounds when an
event occurs, check the position of the mute switch.
Page 60 / 180
52
Using Your Device
Section 4F
Home Page Buttons
²
Top Row of the Home Page Buttons (page 52)
²
Bottom Row of the Home Page Buttons (page 54)
Top Row of the Home Page Buttons
The top horizontal part of the home page has the following buttons:
●
Admin Login
— Click this button to log on as administrator. (See “Logging On as an Administrator”
on page 33.)
●
Admin Setup
— Click this button to rerun the device setup, for example, after you’ve reset the
software to default settings. (See “Welcome to Your Device Window - Select an Option” on
page 116.)
●
Advanced settings
— Click this button to display a window from which you can configure all the
settings of the device and the browser interface. (See “Advanced Settings” on page 53.)
●
Map me
— Use this button to do one of the following:
±
Open a Web browser window that shows your current location. (See “Viewing Your Current
Location in a Web Browser” on page 60.)
±
Search for the closest gas station, restaurant, other points of interest, or do a custom search.
(See “Performing a Location Search” on page 60.)
●
Support
. This button opens the online support site in a new Web browser window or tab. (See
“Support Button” on page 53.)
●
Feedback
— Use this button to send your comments on the device. (See “Feedback” on page 53.)
●
Help
— This button displays a menu with options to open online help, the user guide, or the
important information booklet.
Admin Setup Button
This button displays a window where you can change the administrator password, Wi-Fi network
name (SSID), Wi-Fi security type, and Wi-Fi password.
For more information, see “Welcome to Your Device Window - Select an Option” on page 116.

Rate

4.5 / 5 based on 2 votes.

Popular Sierra Wireless Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top