Page 31 / 129 Scroll up to view Page 26 - 30
SpeedStream Router User Guide
Change PPP Settings
1.
From the main menu, click
Setup
; then
click
PPP
.
The
PPP Setup
window displays.
2.
On the PPP
Setup
window, enter the user
name and password.
3.
Enter/select the optional PPP options if
desired.
4.
Click
Save Settings
.
The
System Summary
window displays.
User Profiles
Setup |
User Profiles
The
Profile Wizard
directs you through the windows required to add, change or delete a user profile. In
these windows, the following navigation buttons direct you through the configuration steps:
Cancel
:
Return to the previous menu without updating information on current window.
Back
:
Return to previous window.
Next
:
Display next step in process.
Note
You must click
Next
to continue. If you press your keyboard ENTER key, one of two things
may occur: the
Current Profiles
window displays without saving the information you entered, or an
error message displays and directs you to return to the previous window.
Finish
:
Return to the updated
Current Profiles
window.
Reset
:
Clears any information you entered and returns to previous status.
Open the Profile Wizard
±
On the main menu, click
Settings
; then click
User Profiles
.
The
Profile Wizard | Current Profiles
window displays. From this window, you can view current
user profiles, delete an existing profile, or add a new profile.
21
Page 32 / 129
SpeedStream Router User Guide
Enable Profiling
When you enable profiling, all users on your
local area network (LAN) must log in with
one of the created user profiles before they
can “surf,” or access, the Internet. If you do
not enable profiling, all computers on your
LAN will have complete Internet access
without any filtering controls.
On the
Current Profiles
window, select
Force all users to be identified before
surfing
.
The window flickers briefly as it
refreshes.
Delete a User Profile
On the
Current Profiles
window, click
Delete
in the row of the user profile you wish to delete.
The window refreshes and displays a blank row where the user profile had been.
Note
When you delete a profile, the window refreshes and that line number is blank. When you enter a
new user profile, it will display in the first available row. For example, in screenshot above, rows 0 and 1
were populated, row 0 was deleted, and then the window refreshed with the blank row 0. When you enter
the next user profile, it will display in row 0, not row 2.
Add a New User Profile
1.
At the bottom left corner of the
Current Profiles
window, click
New Profile
.
The
Profile User Information
window
displays.
2.
On the
Profile User Information
window, enter a name and password for
this profile.
To specify a name for this profile,
click in the
Username
text box; then
type the name.
To specify a password for this profile, click in the
Password
text box and type the password; then
type the same password in the
Confirm
text box.
To continue to the
Profile Content Filtering
window, click
Next
.
22
Page 33 / 129
SpeedStream Router User Guide
Select Content Filtering
1.
On the
Profile Content Filtering
window, select the filter level:
Disable all URL filtering:
Allows the user to have complete
access to all Internet addresses.
Allow access to only URLs
containing the following:
Allows you to specify which Internet
addresses this user
can
access.
This
setting provides the most control; for
example, allowing children to access
only specified child-safe sites.
Deny all access to URLs containing
the following:
Allows you to block specific Internet addresses or addresses containing certain words or phrases.
For example, you could enter “xxx” to prevent access to any sites containing “xxx” in the Web
site address.
2.
If you chose to allow or deny access to specific URLs, you must enter the specific addresses in the
URL Name/Tag
column of the table at the bottom of the
Profile Content Filtering
window. You
can also edit or delete existing URL names and tags.
Enter a New URL Name or Tag
1.
In the highlighted last row of the table, enter the URL name or text phrase in the text box. Separate
words or phrases with commas. For example: www.badsite.com, guns, adult
2.
Click
Add Entry
. The information you entered displays in the last non-highlighted table row.
3.
To continue to the
Profile Configuration Access
window, click
Next
.
Edit an Existing URL Name or Tag
1.
On the
Profile Content Filtering
window, click
Edit
in the row of the URL you want to change.
The contents of that row display in the highlighted last row of the table.
2.
Make any desired changes to the URL name or tag; then click
Add Entry
The changes are written to the table, which refreshes to display the revised content.
3.
Repeat for any other URL names or tags you wish to change.
4.
When finished with all revisions, click
Next
to continue to the
Profile Configuration Access
window.
23
Page 34 / 129
SpeedStream Router User Guide
Delete a URL Name or Tag
1.
On the
Profile Content Filtering
w
click
Delete
in the row of the URL you
want to eliminate.
indow,
The window refreshes to display the
updated table.
2.
Repeat for any other URL names or tags
you wish to delete.
3.
To continue to the
Profile Configuration
Access
window, click
Next
.
Assign Permissions
From the
Profile Configuration Access
window, you can assign permissions specific
to each user profile. Only the designated
permissions will be available when that user
logs in. For example, if you do not select
Bridge, Firewall and DHCP, those selections
will be hidden in that profile.
1.
Click to select each item separately.
- or -
To select all items, click
All Items
.
2.
To continue to the
Profile Security
Access
window, click
Next
.
Select Security Access
From the
Profile Security Access
window,
you can specify that a login pop-up window
displays whenever any user on your LAN
attempts to make configuration changes.
1.
To require admin login, click
Require
admin login
.
2.
To continue to the
Profile Constant IP
Address
,
click
Next
.
24
Page 35 / 129
SpeedStream Router User Guide
Enter Constant IP Address
The
Profile Constant IP Address
window allows you to require that the profile login window display for
a certain IP address, thereby simplifying surfing and minimizing login prompts. For example, you can set
a static IP address on a network computer, and then enter that IP address as the constant IP for a specific
user profile. As a result, the router will always
assume that the IP address is already logged in
with that user profile.
1.
On the
Profile Constant IP Address
window, enter the static IP address.
2.
To finish configuring this user profile,
click
Next
.
Finish
Now that you have successfully configured
the profile for this user, you can return to the
Current Profiles
window to configure
another
user; or you can continue with other
configuration options.
On the
Profile Wizard | Finished
window, click
Next
.
The
Current Profiles
window displays the new or updated user profile settings.
Change a User Profile
1.
On the main menu, click
Setup
; then click
User Profiles
.
The
Current Profiles
window displays.
2.
In the Profile column, click the user name.
The
Profile User Information
window
displays.
Change User Information
1.
At the bottom left corner of the
Current
Profiles
window, click
New Profile
.
The
Profile User Information
window displays.
25

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top