Page 21 / 85 Scroll up to view Page 16 - 20
Router User’s Guide
SpeedStream Router Setup
If you have multiple Point-to-Point (PPP) connections configured, the
PPP Login [choose
connection]
screen displays the available connections. Refer to
Selecting PPP Connection
for
more details.
Point-to-Point offers the Connect on Demand
feature whereby the router will attempt to log on to a
disconnected PPP session if there is requested traffic from the LAN side, and if there is a saved user
name and password. This is especially useful with the Idle Timeout
feature. Connect on Demand is
non-configurable, but is always enabled.
8.
If you selected either option that requires admin login, you will be required to log in again before you
are permitted to perform any activity. When you select any menu option the following login window is
displayed.
9.
Enter the user name and password you assigned to the administrator to perform the remaining
configuration activities.
10. Click
OK
. This displays the screen for the menu option you selected.
11. Refer to the following chapters for details on configuring and managing the SpeedStream Router.
Selecting PPP Connection
If you have configured multiple PPP (Point-to-Point) sessions on your computer, the “Login” window
showing the available PPP connections is displayed after you log on using the “Administrative User
Setup” window.
Click the connection you wish use.
18
Page 22 / 85
Router User’s Guide
SpeedStream Router Setup
PPP Login
If you have configured only one PPP (Point-to-Point) session on your computer, the “Login” window for
that PPP connection is displayed after you log on using the “Administrative User Setup” window.
1. Front the PPP
Login
window, enter the
Username
and
Password
.
2.
To save the settings so you won’t be asked for the user name and password in the future, click
Save
Settings on Connect.
3.
To configure additional PPP options, click
Show Options
. This expands the window to show
configurable options for the PPP connection.
4.
Specify any desired PPP options from the following:
Access Concentrator
Enter the name of the access concentrator as provided by your ISP.
Service Name
Enter the service name provided by your ISP.
Auto-Connect on Disconnect
If selected, the Router will attempt to login every time the DSL trains if you selected
Save
Settings on Connect
.
Idle Timeout (with time value)
Select to disconnect the PPP session if the router has had no traffic for a specified amount of time.
Enter the time in minutes. (This option cannot be used with Autoconnect
.)
19
Page 23 / 85
Router User’s Guide
SpeedStream Router Setup
Home Window
After initial startup, the “Home” window is displayed on startup.
In the left navigation pane of the “Home” window, there are configuration, diagnostic, status and statistic
options for the Router. The list of options displayed differs depending on how a user is logged into the
system. An administrator has full configuration rights (shown above) so will see a complete set of options,
while a user has limited configuration rights and will see the subset specified for that user profile.
Refer to the following chapters for information on how to use each of these options.
Refer to
Chapter 5, “Configuring User Profiles”
, for details on adding, modifying, or deleting user
profiles.
Refer to
Chapter 6, “Configuring ISP Connection Settings”
, for details on setting ISP configuration
parameters. This should only be done when instructed by your ISP.
Refer to
Chapter 7, “Configuring Network Settings”
, for details on configuring network related
information.
Refer to
Chapter 8, “Configuring Security Features”
, for details on adding security to your network.
Refer to
Chapter 9, “Monitoring Router Health”
, for details on viewing network statistics and
connection status.
20
Page 24 / 85
Router User’s Guide
21
5
Chapter 5
Configuring User Profiles
This chapter contains details for configuring users on the SpeedStream Router.
User profiles are used as a means for controlling Router and network access by individual users. Access
to the configuration and management of the Router should be restricted to authorized users only. This
chapter describes how to:
Add user profiles
Edit user profiles
Delete User Profiles
Add User Profiles
To add a new user profile:
1. Select
Setup>User Profiles
from the left navigation pane of the Web interface. This displays the
“Current Profiles” window. User profiles are added using a Wizard accessed from this window.
2. Optionally select the
Force all users to be identified before surfing
option.
3. Select Click
New Profile
. This displays the “Profile User Information” window.
4. Enter a
Username
for the user.
5. Optionally enter a
Password
for the user and
Confirm
it.
Page 25 / 85
Router User’s Guide
Configuring Use Profiles
6. Click
Next
. This displays the “Profile Content Filtering” window. Content filtering restricts access to
undesirable Web sites and Web content.
7.
Select one of the following content filtering options:
Disable all Content Filtering
User has access to all Internet content without restrictions.
Allow access only to website addresses containing the following words
User has access only to the specified Web addresses or to addresses containing specified word
entries defined in the Website word/name table.
Deny all access to website addresses containing the following words
User is denied access to all Web addresses specified as well as addresses that contain any words
specified in the Website word/name table.
8. If the
Allow access only…
or
Deny all access…
option is selected, type a word or Web address in
the box under the Website word/name table and click
Add Entry
. The system responds by adding the
word or Web address to the Website word/name table. This can be done multiple times to add
different entries to the table.
9.
Note
: The entries in the Website word/name table may be either modified or deleted at any time by
clicking either
Edit
or
Delete
next to the corresponding word or Web address.
10.
Click
Next
. This displays the “Profile Configuration Access” window. Profile configuration access
defines the access permission for a user controlling what functions and features are available to that
user.
22

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top