Page 26 / 196
Scroll up to view Page 21 - 25
26
First steps
Connecting and activating the Gigaset SX763 WLAN dsl
Ports on the rear panel
The rear panel of the Gigaset SX763 WLAN dsl houses the ports.
Element
Description
PWR
Socket for the mains adapter supplied
Warning
: Using the wrong power supply unit may damage the
Gigaset SX763 WLAN dsl.
Depending on the device variant, there may be an on/off button
beside the PWR port.
Scan
Button for WPS activation. You can use this button to quickly establish
a secure wireless connection to PCs. The same function is provided via
the device’s user interface (see page 91).
Note:
You can deactivate the
Scan
(registration) button to protect it
against unauthorised access (see page 128).
USB
USB port for printer or USB memory.
LAN1 –
LAN4/WAN
(yellow)
Four 10/100
Mbps
switch ports with automatic recognition (RJ-45).
You can connect up to four devices with Ethernet ports (such as PCs, a
Hub
or
Switch
).
You can connect an external modem (e.g. a VDSL or cable modem) to
the LAN4 port. The integrated ADSL modem is then deactivated. You
will find additional information on the configuration settings on
page 64.
ADSL
(black)
DSL socket for connecting the integrated modem to the DSL port of the
splitter
Page 27 / 196
27
First steps
Reset button
The underside of the Gigaset SX763 WLAN dsl houses the reset button.
Reboot function
: Press and hold the right end of the button for more than 1 second but
less than 5 seconds to reboot the device. This does not affect the configuration settings.
Reset function
: Press and hold the right end of the button for at least 5 seconds to
return all settings to factory settings.
Warning
: This will clear all the configuration settings you have made since the initial
startup.
Updated firmware will not be affected.
Line
(green)
Socket for connecting the phone line to the telephone port on the
splitter
Phone1/2
Sockets for connecting two phones, fax or answering machine
Element
Description
Reset button
Label with WPA
key „SX76xxx“
Page 28 / 196
28
First steps
Connecting to the splitter data port
You can operate the Gigaset SX763 WLAN dsl in two different operating modes in order
to set up an Internet connection:
–
with an integrated ADSL modem
–
with an external modem, such as a VDSL or cable modem
Using the integrated ADSL modem
ì
Connect the
ADSL
port (
black
) on the Gigaset SX763 WLAN dsl to the ADSL socket
on the splitter. To do this, use the DSL cable supplied (
black
).
Splitter
DSL cable (black)
Page 29 / 196
29
First steps
Using an external modem
ì
Connect the
LAN4/WAN
port on the Gigaset SX763 WLAN dsl with an external
modem. To do this, use the cable supplied (
black
).
ì
Then connect this modem to the relevant communications port (e.g. splitter).
Modem
Cable (black)
Page 30 / 196
30
First steps
Connecting to the phone port
To make conventional calls via the fixed network, you must connect your Gigaset SX763
WLAN dsl with the phone port of the splitter.
Analogue phone port
ì
Connect the Gigaset SX763 WLAN dsl with the splitter as follows:
–
Insert one plug of the telephone cable supplied (
green
) into the
Line
port
(
green
) on the Gigaset SX763 WLAN dsl.
–
Plug the other connector on the telephone cable into the phone socket on the
splitter.
Splitter
Telephone cable