Siemens Gigaset-SX763 Router Manual PDF (Setup & Configuration Guide)

Page 121 / 196 Scroll up to view Page 116 - 120

121

Call guide

Advanced options

The functions described in this section, which are available to you when making calls via

your Gigaset SX763 WLAN dsl, apply both for external calls and for internal calls. The

functions described below are dependent on the connected terminal in the case of VoIP

extensions.

Toggling telephone calls

*31# number

Calling line identifi-

cation restriction

Dial *31# before the number if you

want to prevent your number being

displayed to the other party for the

current call.

*51#

Calling line identifi-

cation restriction as

default

Dial *51# to prevent your number

being displayed to the other party per-

manently.

#51#

Cancel calling line

identification restric-

tion as default

You have opted to suppress the display

of your number by default (see

above): Dial #51# to cancel this

default.

*#*51#

Calling line identifi-

cation restriction as

default (at

exchange)

Dial *#*51# to prevent your number

being displayed to the other party per-

manently. In contrast to the above set-

ting, this setting is forwarded to the

exchange and is activated there.

*##51#

Cancel calling line

identification restric-

tion default (at

exchange)

You have opted to suppress the display

of your number by default (see above,

at exchange): Dial *##51# to cancel

this default setting at the exchange.

Please remember:

When using the signal button

R

, always wait until you hear a dialling tone before you

enter the phone number for a consultation call or complete the key combination for

the respective function.

Key combination

Effect

Description

R

Phone number

Consultation

Press

R

to initiate a consultation with

another phone number during a call.

Dial the desired (internal or external)

number for the consultation.

Key combination

Effect

Description

Page 122 / 196

122

Call guide

Conference call between three participants

R2

Accept call waiting/

toggle between two

calls

Press

R2

to accept an incoming call

during a call. The connection to the

first call is put on hold.

If you terminate the first call before-

hand, your phone rings and you can

take the second call as usual.

By pressing

R2

again, you can toggle

to the waiting caller.

R0

Reject call waiting

Press

R0

to reject an incoming call

during a call.

The second call is rejected automati-

cally after 120 seconds have elapsed.

R1

Terminate one call

and return to the

waiting call

Press

R1

to end the current call. You

then switch to the waiting call. The

second call is ended automatically

when you replace the receiver.

Key combination

Effect

Description

R3

Conference call

When you are making a call and a sec-

ond call is waiting (see above), press

R3

to enable a conference call

between you and the two call parties.

R2

End the conference

call and continue

calls separately

Press

R2

to end the conference call.

You are then connected to the previ-

ously active call again and the previ-

ous waiting call is now in the wait

state again.

R4

End conference call

and set up the con-

nection between call

parties

If you press

R4

during a conference

call, you end your call and set up a

connection between the other two

external call parties. You can then

replace the receiver. In the case of an

internal conference call, you simply

need to hang up.

End conference call

Replace the receiver to terminate all

calls.

Key combination

Effect

Description

Page 123 / 196

123

Call guide

Call answering and forwarding

Key combination

Effect

Description

*21*[number]#

Forward to

internal

phone number

Dial

*21*

, the desired internal phone

number to which all calls are to be

forwarded that are received on this

extension, and then press the

#

key.

Example:

You want to set up call for-

warding from your phone to a second

internal phone number.

Dial

*21**2#

.

#21#

Delete call forward-

ing

Use the key combination

#21#

to

delete internal call forwarding, which

you set up as described above.

*61*[number]#

Call forwarding to

internal

number if

absent

Dial

*61*

, the desired internal phone

number to which all calls are to be

forwarded that are received on this

extension, and then press the

#

key.

The call is forwarded after 20 seconds

with this key combination.

#61#

Delete call forward-

ing if absent

Use the key combination

#61#

to

delete internal call forwarding (if

absent), which you set up as

described above.

*67*[number]#

Call forwarding to

internal

number if

line busy

Dial

*67*

, the desired internal phone

number to which all calls are to be

forwarded that are received on this

extension, and then press the

#

key.

The call is forwarded with this key

combination if the line is busy.

#67#

Delete call forward-

ing if line busy

Use the key combination

#67#

to

delete internal and external call for-

warding (if line busy), which you set

up as described above.

#77#

Delete all call for-

warding settings

Use the key combination

#77#

to

delete all call forwarding settings

described above.

Page 124 / 196

124

Call guide

Call waiting and call reject if busy

Special functions

Confirmation tones

If you activate a service attribute, for example set up call forwarding, you will hear a pos-

itive confirmation tone if successful and a negative confirmation tone if unsuccessful.

*43#

Allow call waiting

Use the key combination

*43#

to

allow call waiting when the line is

busy.

#43#

Delete call waiting

Dial

#43#

to disable call waiting if

busy again.

*26#

Reject all calls

Use the key combination

*26#

to

specify that all calls are to be rejected.

This is only possible if call waiting is

disabled.

#26#

Delete the reject calls

setting

Use the key combination

#26#

to

delete the reject all calls setting.

Notes:

u

If you additionally enter

*#

in each case before the key combination shown in the

table, the settings will be forwarded directly to the exchange and will be activated

there.

u

The phone numbers of waiting calls are not displayed even if the caller permits

this.

Key combination

Effect

Description

*52#

Enable

WLAN function

This shortcut key allows the WLAN

function of your Gigaset SX763 WLAN

dsl to be enabled without you having

to open the configuration program.

#52#

Disable

WLAN function

This shortcut key allows the WLAN

function of your Gigaset SX763 WLAN

dsl to be disabled again.

Note:

This function is only available if

Phone-based Management

is enabled. For that

purpose open the user interface

Advanced Settings

–

Administration

–

System

Management

page.

Positive confirmation tone:

Ascending tone sequence at 6-second intervals

Negative confirmation tone:

Regular sequence of short low-frequency tones

Page 125 / 196

125

Administration

The Gigaset SX763 WLAN dsl user interface includes several helpful functions for

administration.

Regional Options

Enables regional settings (page 126)

System Password

Changes the system password (page 127)

System Management

Configures system management (page 128)

Save & Restore

Backs up and, if necessary, restores configuration data

(page 131) or reset the Gigaset SX763 WLAN dsl to the

factory settings (page 132)

Reboot

Reboots the device (page 132)

Firmware Update

Updates firmware (page 133)

System Log

Configures settings for the system log (page 136)

Status

Displays information about the configuration and status of

the Gigaset SX763 WLAN dsl (page 137)

Rate

Popular Siemens Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share