Page 61 / 196 Scroll up to view Page 56 - 60
61
Security Setup Wizard
Saving settings
On the next screen you end the wizard and save the settings. You will be informed of
any security risks that still exist.
ì
Click
Finish
to end the wizard.
The settings will now be activated on the Gigaset SX763 WLAN dsl.
Note:
If you have changes the encyption setting, you must now configure the WEP or WPA
key for the wireless network adapter of the PC that has been configured with other
values. After this you can again wirelessly log on to the Gigaset SX763 WLAN dsl.
Page 62 / 196
62
Configuring Advanced Settings
Configuring Advanced Settings
In the
Advanced Settings
menu, you can configure all the options for the Gigaset
SX763 WLAN dsl. If required, you can also change the settings you made using the wiz-
ard. The following table contains the options available in this menu.
Menu
Description
Internet
This menu comprises all the setting options relating to the
Internet. In particular, you can do the following:
u
Check and change the configuration for Internet access
(page 66) or specify a preferred DNS server (page 70),
u
Configure the firewall, i.e. a number of security and special
functions, for example access control from local PCs to the
Internet (page 72),
u
Make the NAT settings required to provide your own serv-
ices on the Internet (page 76),
u
Set up dynamic DNS for a fixed Internet address on the
device (page 81),
u
Set up routing for your Internet connection services
(page 83).
Local Network
You can change the
Private IP address
of the Gigaset SX763
WLAN dsl here and make settings on the DHCP server
(page 85).
Wireless Network
You can configure the options for wireless communication
(SSID and encryption) here and restrict access to the Gigaset
SX763 WLAN dsl (page 87).
Telephony
You can make the settings for Internet telephony (VoIP) here
and configure your extensions (page 101).
USB
You can make the settings here for operating an external data
carrier, a Web server, a file server or a print server on the USB
port (page 112).
Administration
You can make or change various system settings here, for
example change the password (page 127), set the time
(page 126) or activate remote management (page 128).
In addition, you can also back up the data on the Gigaset SX763
WLAN dsl or configure firmware update (page 131).
Page 63 / 196
63
Configuring Advanced Settings
Internet
If you have configured the Gigaset SX763 WLAN dsl using the two wizards, you have
also configured the
WAN
connection (Internet access). You can check or change these
settings in the
Internet
menu.
This menu also offers you a wide range of possibilities for setting up security settings
and limiting access to the Internet as well as for providing your own services on the
Internet.
You can carry out the following via the
Internet
menu:
Internet
Activate/deactivate the Internet connection and edit the
virtual connection parameters (for further information see
below),
Internet Connection
Check and edit the Internet connection of the Gigaset SX763
WLAN dsl (for further information see below),
DNS Servers
Make DNS server settings (page 70),
MAC Address
Enter the PC's registered MAC address for Internet access
(WAN interface, see page 71),
Firewall
Protect the network against unauthorised external access
(see page 72),
Address Translation
(NAT)
Provide your own services on the Internet (NAT, see
page 76),
Dynamic DNS
Set up dynamic DNS (page 81),
Routing
Set up routing for your Internet connection services
(page 83).
Page 64 / 196
64
Configuring Advanced Settings
Internet selection
You can activate or deactivate the Internet connection for the Gigaset SX763 WLAN dsl
on this screen. You can choose the connection type and set up and edit a number of con-
nection services.
ì
In the
Advanced Settings
menu, select:
Internet
ì
Select the appropriate option to activate or deactivate the Internet function of the
Gigaset SX763 WLAN dsl.
ì
Choose the desired
Connection type
for your Internet connection:
Choose the
ADSL
if you are using the integrated ADSL modem of the Gigaset
SX763 WLAN dsl.
Choose
Ethernet
if you are setting up the connection to the Internet via an Eth-
ernet network connection (e.g. if you are using an external modem with an Eth-
ernet connection).
If you change the connection type, you must also modify your Internet access set-
tings accordingly (page 66).
Configure multiple connection services
Your Internet service provider can permit you to set up a number of
Connection serv-
ices
. You can set up these services here. You can configure rules for using these services
under the
Routing
option (page 83).
ì
Select the appropriate option to activate or deactivate
Configure multiple connec-
tion services
.
If you have already configured an Internet connection (e.g. in the Basic Setup Wizard),
this is shown as
Connection service selected to edit
. This is then also displayed on
other pages of the
Internet
menu.
Page 65 / 196
65
Configuring Advanced Settings
ì
For an ADSL connection, make the following settings:
Enter the values for
VPI / VCI
for each connection service that you have received
from your Internet service provider.
Enter a description to identify the respective connection service.
Click
Add
to create a new entry.
Click
Delete
to delete an entry.
Click
OK
to save and apply the changes.
ì
For an Ethernet connection, make the following settings:
Enter the values for
VLAN tag
for each connection service that you have received
from your Internet service provider.
Choose the desired
Priority
for each connection service in comparison with the
other connection services.
You can choose between 0 and 7 for the
Priority
, whereby 0 is the highest priority.
– Click
Add
to create a new entry.
– Click
Delete
to delete an entry.
– Click
OK
to save and apply the changes.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top