46
Configuring the Advanced Settings
You can deactivate this function by entering "0". This means that the connection
will continue to exist even if no data is transmitted. If you have a time-based tariff
this can result in high charges. In this case you should enter a value other than
"0".
This time setting only applies to the
Connect on demand
option.
–
Select
Connect manually
if you always want to establish and end the connection
to the Internet manually. If you have a time-based tariff this will save you high
connection charges. How to establish a connection manually is described on
page 90.
ì
Click on
Test Settings
to check the Internet connection. The router will attempt to
connect to the Internet. Any Internet connection already in existence will be closed
first.
You will then be returned to the
Internet Connection
screen. If necessary, you can
now amend your entries.
ì
If the test was successful, click on
OK
to apply the settings.
PPPoE pass-through
If you activate the
PPPoE pass-through
function a PC in the network can connect to the
Internet via its own connection ID. The router puts these connections through.
ì
In the
Advanced Settings
–
Internet
menu, select
Internet Connection
.
ì
Select the option
On
to activate
PPPoE pass-through
.
ì
Click on
OK
to apply the settings.