Page 11 / 29
Scroll up to view Page 6 - 10
3. Connecting your Almond as a Router
i.
Unplug the AC adapter & Ethernet cables of your Internet modem (Cable, xDSL or Fiber). If your modem has a battery, please remove it.
ii.
Wait for one (1) minute. If your modem has a battery, re-insert it. Plug the AC adapter of the modem back into the power outlet.
11
Page 12 / 29
iii.
Wait for one (1) minute, then plug the AC adapter of your Almond into the power outlet.
iv.
Please wait for your Almond to power on.
v.
At this point, please select the language you want to use when you access the Almond’s touchscreen and Web UI (
Note
: The language can be
changed via the icon in the top right corner of the touch screen at any point).
12
Page 13 / 29
vi.
Select the region you reside in.
vii.
Your Almond will save the settings and reboot.
viii.
Once your Almond has rebooted you’ll be greeted by a Setup Wizard that will help you through the basic settings that will get you connected to
the internet. Tap on [Start wizard] to continue setting up your Almond and follow the on-screen instructions.
13
Page 14 / 29
ix.
By selecting Router from the touchscreen and tapping on [Next], your Almond will start the automatic configuration procedure.
14
Page 15 / 29
x.
The first thing you should do is attach the network cable from your modem/router or other type of network port that you receive your Internet
connection through.
Note:
The cable should be connected to the grey port on your Almond.
xi.
The Almond will try to auto-detect your connection type and as long as your connection provides all the settings via DHCP, this step should be
automatic.
15
19216811.live