Page 6 / 29
Scroll up to view Page 1 - 5
iii.
At this point, please select the language you want to use when you access the Almond’s touchscreen and Web UI (
Note
: The language can be
changed via the icon in the top right corner of the touch screen at any point).
iv.
Select the region you reside in.
v.
Your Almond will save the settings and reboot.
6
Page 7 / 29
vi.
Once your Almond has rebooted you’ll be greeted by a Setup Wizard that will help you through the basic settings that will get you connected to
the internet. Tap on [Start wizard] to continue setting up your Almond and follow the on-screen instructions.
7
Page 8 / 29
vii.
Start by selecting Range Extender and tap on [Next] to continue the setup.
viii.
At this point, you’ll be greeted by the screen below. Find your wireless internet connection in the list (Wi-Fi router/Access point) and tap on it to
select it, it should now be highlighted in blue as per the image below. Tap on [Next] to continue the setup.
8
Page 9 / 29
ix.
Enter the password for your wireless internet connection via the on screen keyboard that pops up once you tap anywhere inside the text box.
x.
Once you’ve entered the password, tap on [Done] and then [Next] to continue.
9
Page 10 / 29
xi.
You should now be greeted by the screen below that shows that you’ve successfully connected the Almond to your Router or Access point. Tap
on [Finish] to end the setup process.
Note:
If you want your Almond to issue IP addresses, i.e. to act as a DHCP server, then choose the Wireless WAN option instead of Range Extender
option. In Range Extender mode, the Almond relies on your main router to act as the DHCP server.
10
19216811.live