Page 46 / 80 Scroll up to view Page 41 - 45
45
MAC Filter
The Security Menu includes the MAC Filter screen.
IMPORTANT
Do not enable MAC filtering unless you have added your own computer’s MAC
address to the trusted client list. Otherwise you will be unable to access the device.
The MAC Filter screen enables you to allow specific devices to connect to MiFi 2200’s wireless
network. For example, if you put the MAC address for your WiFi-enabled mobile phone and the MAC
addess for your computer in the MAC Filter Trusted Client List, then only those devices can connect
to MiFi 2200.
Trusted devices still need the correct network name (SSID) and network key (WiFi passkey).
NOTE 
The MAC address on the Windows operating system is called the
Physical Address
.
Enable MAC Filter
This checkbox enables or disables the MAC Filter feature.
When the feature is
enabled
(checked), you must add the MAC address for the device to the
Trusted Client List. If a device not in the list tries to connect to the MiFi 2200 wireless network, the
connection is blocked even if the device has the correct network name (SSID) and network key (WiFi
passkey).
Page 47 / 80
46
When the feature is
disabled
(un-checked), any device with the correct network name (SSID) and
network key (WiFi passkey) can connect to the MiFi 2200 wireless network.
Find the MAC Address on a Computer
The Media Access Controller (MAC) Address is also known as a hardware or physical address for a
device (usually a network adapter). It consists of six pairs of numbers and letters (for example,
00-21-9B-1C-64-34).
You can view the MAC address for any device connected to the MiFi wireless network from the WiFi
screen. [See
WiFi
(page 38).
]
Tip! 
You can cut and paste your computer’s MAC address from the WiFi Clients section of the WiFi screen.
If the computer is not connected to the MiFi wireless network, you can find the MAC address
directly.
On a Windows PC, the MAC address is the Physical Address. You can find the Physical Address
by running
ipconfig /all
from the cmd window.
»
To run
ipconfig/all
, select
Start
>
All Programs
(or
Programs
) >
Accessories
>
Command Prompt
to open
the Command Prompt window. Then type
ipconfig/all
and press the
Return
or
Enter
key.
On a Mac, the MAC address is the AirPort ID.
»
To find the AirPort ID, open the
Apple
(
)
Menu
>
System Preferences
>
Network
. In the list, click
AirPort
. Click
Advanced
. A sheet opens. Click the
AirPort
tab. The AirPort ID is at the bottom of the sheet.
IMPORTANT
Windows only: Make sure you get the MAC address for the wireless network
adapter and not the Ethernet controller (NIC), if the computer has both.
Add a Device to the Trusted Client List
To add a device to the Trusted Client List, follow these steps.
±
Type the WiFi-enabled device’s MAC address in the
Add Trusted Client MAC Address
field. You can
use either “:” or “-” as the separator (for example, 00:21:9B:1C:64:34 or 00-21-9B-1C-64-34).
Tip! 
You can cut and paste your computer’s MAC address from the WiFi Clients section of the WiFi screen.
Click
Add Client
.
Repeat steps 1 and 2 as needed.
When the list is complete, click
Apply
.
Remove a Device from the Trusted Client List
To remove a device from the Trusted Client List, follow these steps.
±
Click on the device in the Trusted Client List to select it.
Click
Delete
.
Page 48 / 80
47
Buttons
Delete Client
removes a device from the Trusted Client List.
Add Client
adds the MAC address typed in the Add Trusted Client MAC Address field to the Trusted
Client List.
Apply
saves changes made to the list.
Revert
discards changes made to the list.
Page 49 / 80
48
Port Filtering
The Security Menu includes the Port Filtering screen.
Port filtering blocks outgoing Internet connections. You can set a list of Allowed Applications to only
allow certain programs to connect to the Internet.
Enable Port Filtering
This checkbox enables or disables the Port Filtering feature.
When the feature is
enabled
(checked), you must select a port filtering application in the Allowed
Applications list to allow that application to connect to the Internet. For example, if you select VPN
in the Allowed Applications list but do not select HTTP, you can connect to a VPN server but you
cannot connect to a web page using your Internet browser.
When the feature is
disabled
(un-checked), any application can connect to the Internet.
Page 50 / 80
49
Allowed Applications
Enable each port filtering application that needs to be able to access the Internet. When port
filtering is enabled, all other applications are blocked.
Custom Applications
This page has no effect unless the Port Filtering feature is enabled.
Click
Custom Applications
to open the Custom Applications screen. You can define and enable custom
Port Filtering applications. You need to know details of the traffic used and generated by the
applications you wish to define.
The Custom Applications screen uses checkboxes to enable port filtering for custom applications.
Similar to the Allowed Applications list, you must enable custom applications so they can connect
to the Internet.
Application Name
— Type a name for the application.
Ports
— Click the Ports link to show the Port Definition Panel. Click
Hide
when you finish
defining the current application. Click
Apply
when you finish defining all applications.
Port Definition Panel
— This allows you to define the ports used by this application. The
background shading and dialog title indicates the current application.
Port Ranges
You can define up to five port ranges for each application. Each port range has the following
attributes.
Start Port
— Type the beginning of the range of port numbers used by outgoing traffic
for this application. Use as many rows as necessary to define the required number of port
ranges. Unused rows can be left blank.
End Port
— Type the end of the range of port numbers. If the port is a single port instead of a
range, type the same value for both the Start Port and the End Port.
Protocol
— For each port range (each row), select the protocol (TCP, UDP, or both) used by
that port range.
You can define all of your applications before you click
Apply
to save your changes.
Use the
Ports
and
Hide
links as necessary to open and close the Port Definition Panel so you can
define the ports for each application as needed

Rate

3.5 / 5 based on 2 votes.

Popular Samsung Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top