USM-Metro-RKS1-091807-01

Ruckus Metro Broadband Gateway

75

Administrator Management

Figure 65—

Administrator :: Management page

The default setting is for NUTTCP Server Status to be disabled. Note the following:

•

If you check

Enabled

, the NUTTCP port remains open to wait for the request from the service

provider.

• Checking

Oneshot

opens the NUTTCP port for one stream of data and then closes it.

N

OTE

–

You must enable the default port 5000 and 5001 in a firewall environment for the control and data port of

NUTTCP.

4Gon

www.4Gon.co.uk

[email protected]

Tel: +44 (0)1245 808295

Fax: +44 (0)1245 808299

76

Ruckus Metro Broadband Gateway

USM-Metro-RKS1-091807-01

Upgrading the Firmware

Upgrading the Firmware

The

Maintenance :: Upgrade

option provides a utility for updating the Metro Broadband Gateway’s

firmware. A firmware update may be necessary or desirable to add new features, important fixes or

enhancements to the Metro Broadband Gateway.

The Metro Broadband Gateway is provided with an automatic firmware upgrade feature. This feature checks

to verify that you have the latest firmware when you reboot the Metro Broadband Gateway, or at an interval

you set even if you do not reboot. The automatic firmware upgrade is the default option. You may wish to

disable the automatic firmware upgrade, and select to perform manual, or on-demand, firmware upgrades.

When an upgrade is performed, the Metro Broadband Gateway automatically reboots.

You can perform an immediate firmware upgrade by clicking

Perform Upgrade

. The Metro Broadband

Gateway will proceed with a firmware upgrade from the specified server or URL.

1.

In the Ruckus Wireless Web Interface, click the

Maintenance :: Upgrade

option.

T

Figure 66—

Maintenance :: Upgrade firmware page

4Gon

www.4Gon.co.uk

[email protected]

Tel: +44 (0)1245 808295

Fax: +44 (0)1245 808299

USM-Metro-RKS1-091807-01

Ruckus Metro Broadband Gateway

77

Upgrading the Firmware

Automatic Firmware Upgrade

For TFTP and FTP, the

Firmware Server

,

Port

,

Image Control File

,

User Name

(FTP only), and

Password

(FTP only) have been preconfigured to automatically access Ruckus Wireless’s firmware update

website. For Web, the

URL

has been pre-configured as well.

The default interval for checking for new updates is 12 hours, as shown in the

Interval to Check for

Software Upgrade

drop-down list. You can set this to a longer or shorter interval as required.

1.

If you have changed any of the upgrade parameters, such as the interval, click the

Save Parameters only

button.The system will update the firmware as configured.

Manual Firmware Upgrade

Contact your service provider for more information about Web sites or TFTP/FTP sites used to store

firmware images for the Metro Broadband Gateway.

CAUTION:—

If you have recently made configuration changes to the Metro Broadband Gateway, make sure

to reboot the system (see

“Rebooting or Resetting the Device” on page 78

) first so that your changes are

preserved. Then update the firmware.

To choose the manual firmware upgrade option, proceed as follows:

1.

Go to

Maintenance :: Upgrade

and click

Perform Upgrade

.

4Gon

www.4Gon.co.uk

[email protected]

Tel: +44 (0)1245 808295

Fax: +44 (0)1245 808299

78

Ruckus Metro Broadband Gateway

USM-Metro-RKS1-091807-01

Rebooting or Resetting the Device

Rebooting or Resetting the Device

You may be required to reboot the device for configuration changes to take effect.

Two types of reboot are provided:

•

If the system times out and you have to re-login before setting the reboot, your configuration changes will

be saved, as long as you have already clicked the Update button to save the current configuration.

•

If you have powered down or logged out of the Metro Broadband Gateway before clicking the

Update

Settings

button and the

Reboot

button, your configuration changes will be lost.

The

Reset to factory settings?

option restarts the device with the factory default configurations. All

previous configurations will be lost.

1.

To reboot for either type, click

Maintenance :: Reboot / Reset

.

2.

Click

Reboot Now

to reboot. Current settings are saved.

3.

Click

Reset Now

to reset the device to factory default settings. All configurations are lost.

Figure 67—

Maintenance :: Reboot or Reset page

During a reboot, the antenna LEDs on the top of the Metro Broadband Gateway will momentarily go out,

then light up again.

4Gon

www.4Gon.co.uk

[email protected]

Tel: +44 (0)1245 808295

Fax: +44 (0)1245 808299

USM-Metro-RKS1-091807-01

Ruckus Metro Broadband Gateway

79

Appendix A: Technical Specifications

Physical Characteristics

Power requirements

Metro Broadband Gateway:

5V-18V 10W

External power adapter:

Unifive Technology Co LTD, Model US300520, Input

100-240V AC, Output 5V DC 2A, UL Listed

DVE, Model DSA-031F-12 UK 12, Input 100-240V AC, Output

12V DC 1A, TUV Certified

DVE, Model DSA-031F-12 EU 12, Input 100-240V AC, Output

12V DC 1A, TUV Certified

Physical size

5.72 x 4.92 x 2.9 in (145 x 125 x 74 mm.)

Weight

0.53 lbs (0.24 kg)

Antenna

Internal software-configurable antenna array with six

directional, high-gain elements (four vertical and two

horizontal) and 63 unique antenna patterns

Ethernet ports

1 or 5 auto MDX, auto sensing 10/100 Mbps, RJ45 port

LED display

Antenna

Power

LAN

Wireless

Air Quality

Environmental conditions

Operating Temperature: 32

o

F – 104

o

F (0

o

C – 40

o

C)

Operating Humidity: 15% - 95% non condensing

Electromagnetic Emissions

Meets requirements of FCC Part 15 Class B

Management

Configuration and monitoring interface

Ruckus Wireless Web User Interface (WebUI)

4Gon

www.4Gon.co.uk

[email protected]

Tel: +44 (0)1245 808295

Fax: +44 (0)1245 808299