Page 16 / 48
Scroll up to view Page 11 - 15
11
4. The Graphic User Interaface
After the password authorization, the Setup Wizard shows up as the home page of
the Graphic User interface. You may click on each folder on left column of each page
to get access to each configuration page.
Page 17 / 48
12
Setup Wizard
If you are using the router for the first time, you may follow the procedures of the setup
wizard to do a step-by-step configuration.
Note:
The following instruction does an overall introduction to the Setup Wizard. For detail
information to each item, please refer to instruction of each page.
1.
To start the Setup Wizard, click the “Next” button to proceed.
2.
Select your demanding operation mode and click “Next”.
Page 18 / 48
13
3.
Mark the check box to enable synchronizing time by NTP server. Select the religion
you live and a NTP server by clicking the drop list then click “Next”.
4.
Specify an IP address and subnet mask for connecting to the router in LAN.
Page 19 / 48
14
5.
Select a WAN access type for the router to connect to Internet. Fill in the parameters
that required in each blank, and then click the “Next” button. You may get those
parameters from your ISP.
6.
Select the wireless parameters that are used for associating with this router and click
“Next”
Page 20 / 48
15
7.
Click the drop list to select the encryption type for your wireless network. Fill in the
parameters for the encryption type you select and click finish to complete
configuration.
19216811.live