Page 41 / 48
Scroll up to view Page 36 - 40
36
Virtual DMZ
The virtual DMZ is used to enable protocols, which need to open ports on
the router. The router will forward all unspecified incoming traffic to the
host specified in this page.
To configure it, enter the Host IP (private IP address) and Click “Apply
changes” to enact the setting.
Page 42 / 48
37
Management
Status
In the home page of the Wireless Router, the left navigation bar shows the
options to configure the system. In the right navigation screen is the
summary of system status for viewing the configurations.
z
System
Uptime
The period that you power the device on.
Firmware Version
The version of the firmware applied on this device.
z
Wireless Configuration
Mode
The operation mode of the wireless router
Band
The performing band of this wireless router
SSID
The name of this wireless network
Page 43 / 48
38
Channel Number
The channel used by the wireless LAN. All
devices in the same wireless LAN should user
the same channel
Encryption
The security encryption status of this wireless
network
BSSID
The Basic Service Set Identity of this router.(This
parameter is the same as the MAC address of
LAN port)
Associated Clients
The number of associated clients.
z
LAN Configuration
IP Address
IP Address of router
Subnet Mask
Subnet Mask of the router
DHCP Server
Enabled or Disable of DHCP
MAC Address
MAC Address of LAN-port
z
WAN Configuration
Attain IP Protocol
Static IP address
IP Address
IP address of WAN-port
Subnet Mask
Subnet Mask of WAN-port
Default Gateway
Default Gateway of WAN-port
MAC Address
MAC Address of WAN-port
Page 44 / 48
39
Statistics
On this page, you can monitor the sent & received packets counters of
wireless, Ethernet LAN, and Ethernet WAN. To see the latest report, click
refresh button.
DDNS
This page allows users to connect to DDNS. To enable DDNS, Mark the
“Enable DDNS” checkbox. Select the service provider from the drop list. Fill
in domain name, username, and password. Click the “Apply Change” button
after configuration.
Page 45 / 48
40
Time Zone Setting
This page allows users to configure the time of the router. To specify
manually, fill in the blanks in “Current Time” and click the “Apply Change”
button. To synchronize time from a timeserver, please mark the “Enable NTP
client update” checkbox, select a NTP server from the drop list or manually
enter a NTP server. Click the “Apply Change” button after your configuration.
System Log
This System Log page shows the information of the current activities on
the router.
To enable system log function:
1.
Mark the “Enable Log” checkbox.
2.
To see all information of the system, select the “system all” checkbox.
To see wireless information only, select the “wireless” checkbox.
To sent the log information to a certain note, select the “Enable
Remote Log” checkbox and fill in the IP address in the “Log Server IP
Address” box.
3.
Click the “Apply Changes” button to activate
You could also click the “Refresh” button to refresh the log information or click
the “clear” button to clean the log table.
19216811.live