Page 46 / 62
Scroll up to view Page 41 - 45
46
Example:
Configuration on NAT Router
Destination
SubnetMask
Gateway
Hop Enabled
192.168.1.0 255.255.255.0
192.168.123.216
1
ˇ
192.168.0.0 255.255.255.0
192.168.123.103
1
ˇ
So if, for example, the client3 wanted to send an IP data gram to 192.168.0.2, it would use the above
table to determine that it had to go via 192.168.123.103 (a gateway),
And if it sends Packets to 192.168.1.11 will go via 192.168.123.216
Each rule can be enabled or disabled individually.
After
routing table
setting is configured, click the
save
button.
Page 47 / 62
47
4.7.6 Schedule Rule
You can set the schedule time to decide which service will be turned on or off. Select the
“
enable
”
item.
Press
“
Add New Rule
”
Page 48 / 62
48
You can write a rule name and set which day and what time to schedule from
“
Start Time
”
to
“
End
Time
”
. The following example configure
“
ftp time
”
as everyday 14:10 to 16:20
Page 49 / 62
49
After configure Rule 1
Schedule Enable
Selected if you want to Enable the Scheduler.
Edit
To edit the schedule rule.
Delete
To delete the schedule rule, and the rule# of the rules behind the deleted one will decrease one
automatically.
Schedule Rule can be apply to Virtual server and Packet Filter, for example:
Page 50 / 62
50
Exanple1:
Virtual Server
–
Apply Rule#1 (ftp time: everyday 14:10 to 16:20)
Exanple2:
Packet Filter
–
Apply Rule#1 (ftp time: everyday 14:10 to 16:20).
19216811.live