1. Home
    2. /
  2. Manuals
    3. /
  3. RadioLabs
    4. /
  4. O2Storm
    5. /
  5. 3
Page 11 / 77 Scroll up to view Page 6 - 10
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
3
1.4
Panel Description (Model A)
LED Indicator
State
Description
1. Power LED
On
The WLAN Broadband Router is powered on.
Off
The WLAN Broadband Router is powered off.
2. WLAN LED
Flashing
Data is transmitting or receiving on the
antenna.
Off
No data is transmitting or receiving on the
antenna.
3. LAN LED
ACT
Flashing
Data is transmitting or receiving on the LAN
interface.
On
Port linked.
Off
No link.
4. WAN LED
ACT
Flashing
Data is transmitting or receiving on the WAN
interface.
On
Port linked.
Off
No link.
Power LED
WLAN LED
LAN LED
WAN LED
Page 12 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
4
Interfaces
Description
1.
Antenna
(Fixed / SMA)
The Wireless LAN Antenna.
2.
Power
The power jack allows an external DC +7.5 V power supply
connection.
The external AC to DC adaptor provide adaptive power
requirement to the WLAN Broadband Router.
3.
LAN
The RJ-45 sockets allow LAN connection through Category 5
cables. Support auto-sensing on 10/100M speed and half/ full
duplex; comply with IEEE 802.3/ 802.3u respectively.
4.
WAN
The RJ-45 socket allows WAN connection through a Category
5 cable. Support auto-sensing on 10/100M speed and half/ full
duplex; comply with IEEE 802.3/ 802.3u respectively.
5.
Reset
Push continually the reset button 5 ~ 10 seconds to reset the
configuration parameters to factory defaults.
WAN
LAN
Power
Antenna
Reset
Page 13 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
5
1.5
Panel Description (Model B)
LED Indicator
State
Description
1. Power LED
On
The WLAN Broadband Router is powered on.
Off
The WLAN Broadband Router is powered off.
2. WLAN LED
Flashing
Data is transmitting or receiving on the
antenna.
Off
No data is transmitting or receiving on the
antenna.
3. WAN LED
ACT
Flashing
Data is transmitting or receiving on the WAN
interface.
Off
No data is transmitting or receiving on the
WAN interface.
10/100M
On
Connection speed is 100Mbps on WAN
interface.
Off
Connection speed is 10Mbps on WAN
interface.
4. LAN LED
ACT
Flashing
Data is transmitting or receiving on the LAN
interface.
Off
No data is transmitting or receiving on the LAN
interface.
10/100M
On
Connection speed is 100Mbps on LAN
interface.
Off
Connection speed is 10Mbps on LAN interface.
WAN LED
LAN LED
Power LED
WLAN LED
Page 14 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
6
Interfaces
Description
1. Antenna
The Wireless LAN Antenna.
2. WAN
The RJ-45 socket allows WAN connection through a Category
5 cable. Support auto-sensing on 10/100M speed and half/ full
duplex; comply with IEEE 802.3/ 802.3u respectively.
3. LAN
The RJ-45 sockets allow LAN connection through Category 5
cables. Support auto-sensing on 10/100M speed and half/ full
duplex; comply with IEEE 802.3/ 802.3u respectively.
4. Power
The power jack allows an external DC +7.5 V power supply
connection.
The external AC to DC adaptor provide adaptive power
requirement to the WLAN Broadband Router.
5. Reset
Push continually the reset button 5 ~ 10 seconds to reset the
configuration parameters to factory defaults.
WAN
LAN
Power
Antenna
Reset
Page 15 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
7
2
Installation
2.1
Hardware Installation
Step 1: Place the Wireless LAN Broadband Router to the best optimum transmission
location. The best transmission location for your WLAN Broadband Router is
usually at the geographic center of your wireless network, with line of sign to all
of your mobile stations.
Step 2: Connect the WLAN Broadband Router to your wired network. Connect the
Ethernet WAN interface of WLAN Broadband Router by category 5 Ethernet
cable to your switch/ hub/ xDSL modem or cable modem. A straight-through
Ethernet cable with appropriate cable length is needed.
Step 3: Supply DC power to the WLAN Broadband Router. Use only the AC/DC power
adapter supplied with the WLAN Broadband Router; it may occur damage by
using a different type of power adapter.
The hardware installation finished.
2.2
Software Installation
¾
There are no software drivers, patches or utilities installation needed, but only the
configuration setting. Please refer to chapter 3 for software configuration.
Notice:
It will take about 55 seconds to complete the boot up sequence after
powered on the WLAN Broadband Router; Power LED will be active,
and after that the WLAN Activity LED will be flashing to show the
WLAN interface is enabled and working now.

Rate

3.5 / 5 based on 2 votes.

Popular RadioLabs Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top