Page 51 / 101
Scroll up to view Page 46 - 50
3.3.4.2 Block MAC Address
In the
PARENTAL CONTROL
page, click
Block MAC Address
. The page as
shown in the following figure appears:
Click
Add
. The page as shown in the following figure appears:
45
Page 52 / 101
The following table describes the parameters in this page.
Field
Description
User Name
Enter the name that identifies your configuration. For
example,
kids
.
Current PC’s MAC
Address
Enter the MAC address of the computer that connects
to the device.
Other MAC Address
Enter the MAC address of another device that is
included in MAC filtering.
Schedule
Select the time of MAC filter from the drop-down list.
You can select
always
or
never
.
Manual Schedule
If you select this check box, you need to manually set
the time of MAC filtering.
Enter the use name and MAC address. Select the corresponding time and days.
Then, click
Apply
to add the MAC address to the
BLOCK MAC ADDRESS
table.
The page as shown in the following figure appears:
46
Page 53 / 101
3.3.5
Filtering Options
Choose
Advanced
>
Filtering Options
. The
FILTERING OPTIONS
page as
shown in the following figure appears:
47
Page 54 / 101
3.3.5.1 Inbound IP Filtering
In the
FILTERING OPTIONS
page, click
Inbound IP Filtering
. The
INCOMING
IP FILTERING
page as shown in the following figure appears:
Click
Add
to add an inbound IP filter. The page as shown in the following figure
appears:
Enter the
Filter Name
and specify at least one of the following criteria: protocol,
source/destination IP address, subnet mask, and source/destination port.
48
Page 55 / 101
Then, click
Apply
to save the settings.
Note:
The settings apply only when the firewall is enabled.
The
ACTIVE INBOUND FILTER
in the
INCOMING IP FILTERING
page displays
detailed information of each created inbound IP filter. Click
Delete
to delete an IP
filter. Note that the
Delete
button appears only when at least one IP filter exists.
3.3.5.2 Outbound IP Filtering
By default, all outgoing IP traffic from the LAN is allowed. The outbound filter
allows you to create a filter rule to block outgoing IP traffic by specifying a filter
name and at least one criterion.
In the
FILTERING OPTIONS
page, click
Outbound IP Filtering
. The
OUTGOING IP FILTERING
page as shown in the following figure appears:
Click
Add
to add an outbound IP filter. The page as shown in the following figure
appears:
49
19216811.live