1. Home
    2. /
  2. Manuals
    3. /
  3. Pirelli
    4. /
  4. Wireless-VoIP-AG-v1
    5. /
  5. 12
Page 56 / 149 Scroll up to view Page 51 - 55
DISCUS™ Multiplay Wireless VoIP AG
(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
50
OGU 930500105-A1
Network Connections Section
Additional IP Addresses.
You can add alias names (additional IP addresses) to
the gateway by clicking the 'New IP Address' link. This enables you to access
the gateway using these aliases in addition to the 192.168.1.1
LAN USB
The LAN USB connection allows you to connect a Windows PC to the Router
using a USB cable. Connect your gateway's USB slave port to a master port on
the PC.
LAN USB >> GENERAL
To view and edit the LAN USB connection settings, click the 'LAN USB' link in
the 'Network Connections' screen. The 'LAN USB Properties' screen will
appear, displaying a detailed summary of the connection's parameters, under
the 'General' tab. These parameters can be edited in the rest of the screen's
tabs, as described in the following sections.
FIGURE 11.
LAN USB >> General Panel
LAN USB >> SETTINGS
General.
This section displays the connection's general parameters. It is recom-
mended not to change the default values unless familiar with the networking
concepts they represent. Since your gateway is configured to operate with the
default values, no parameter modification is necessary.
Page 57 / 149
DISCUS™ Multiplay Wireless VoIP AG
(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
51
OGU 930500105-A1
Network Connections Section
FIGURE 12.
LAN USB >> Settings Panel
Schedule.
By default, the connection will always be active. However, you can
configure scheduler rules in order to define time segments during which the
connection may be active. Once a scheduler rule(s) is defined, this field
changes to a combo-box, allowing you to choose between the available rules.
Network.
Select whether the parameters you are configuring relate to a WAN,
LAN or DMZ connection, by selecting the connection type from the combo-box.
Physical Address.
The physical address of the network card used for your net-
work. Some cards allow you to change this address.
MTU.
MTU is the Maximum Transmission Unit. It specifies the largest packet
size permitted for the transmission.
LAN USB >> ADVANCED
Internet Connection Firewall.
Your gateway's firewall helps protect your com-
puter by preventing unauthorized users from gaining access to it through a net-
work such as the Internet. The firewall can be activated per network connection.
To enable the firewall on this network connection, select the 'Enabled' check
box.
Page 58 / 149
DISCUS™ Multiplay Wireless VoIP AG
(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
52
OGU 930500105-A1
Network Connections Section
FIGURE 13.
LAN USB >> Advanced Panel
Additional IP Addresses.
You can add alias names (additional IP addresses) to
the gateway by clicking the 'New IP Address' link. This enables you to access
the gateway using these aliases in addition to the 192.168.1.1
LAN WIRELESS 802.11G
ACCESS POINT
DISCUS™ Multiplay Wireless VoIP AG
integrates multiple layers of wireless
security. These include the IEEE 802.1x port-based authentication protocol,
RADIUS client, EAP-MD5, EAP-TLS, EAP-TTLS, EAP-PEAP, Wi-Fi Protected
Access (WPA), WPA2, WPA and WPA2 (mixed mode) and industry leading Dis-
cus Firewall and VPN applications. In addition, the Router’s built-in authentica-
tion server enables home/SOHO users to define authorized wireless users
without the need for an external RADIUS server.
LAN WIRELESS 802.11G
ACCESS POINT >>
GENERAL
To view and edit the LAN Wireless connection settings, click the 'LAN Wireless
802.11g Access Point' link in the 'Network Connections' screen. The 'LAN Wire-
less 802.11g Access Point Properties' screen will appear, displaying a detailed
summary of the connection's parameters, under the 'General' tab. These
parameters can be edited in the rest of the screen's tabs, as described in the fol-
lowing sections.
Page 59 / 149
DISCUS™ Multiplay Wireless VoIP AG
(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
53
OGU 930500105-A1
Network Connections Section
FIGURE 14.
LAN Wireless 802.11g Access Point >> General Panel
LAN WIRELESS 802.11G
ACCESS POINT >>
SETTINGS
General.
This section displays the connection's general parameters. It is recom-
mended not to change the default values unless familiar with the networking
concepts they represent. Since your gateway is configured to operate with the
default values, no parameter modification is necessary.
Page 60 / 149
DISCUS™ Multiplay Wireless VoIP AG
(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
54
OGU 930500105-A1
Network Connections Section
FIGURE 15.
LAN Wireless 802.11g Access Point >> Settings Panel
Schedule.
By default, the connection will always be active. However, you can
configure scheduler rules in order to define time segments during which the
connection may be active. Once a scheduler rule(s) is defined, this field
changes to a combo-box, allowing you to choose between the available rules.
Network.
Select whether the parameters you are configuring relate to a WAN,
LAN or DMZ connection, by selecting the connection type from the combo-box.
Physical Address.
The physical address of the network card used for your net-
work. Some cards allow you to change this address.
MTU.
MTU is the Maximum Transmission Unit. It specifies the largest packet
size permitted for Internet transmission. In the default setting, Automatic, the
gateway selects the best MTU for your Internet connection. Select "Automatic
by DHCP" to have the DHCP determine the MTU. In case you select "Manual", it
is recommended to enter a value in the 1200 to 1500 range.
LAN WIRELESS 802.11G
ACCESS POINT >>
WIRELESS
Wireless Access Point
Use this section to define the basic wireless access point settings.
SSID.
The SSID is the network name shared among all points in a wireless net-
work. The SSID must be identical for all points in the wireless network. It is
case-sensitive and must not exceed 32 characters (use any of the characters on
the keyboard). Make sure this setting is the same for

Rate

3.5 / 5 based on 2 votes.

Popular Pirelli Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top