1. Home
    2. /
  2. Manuals
    3. /
  3. Pirelli
    4. /
  4. VoIP-AG-v1-t-Annex-A-OT
    5. /
  5. 6
Page 26 / 149 Scroll up to view Page 21 - 25
DISCUS™ Multiplay Wireless VoIP AG
(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
20
OGU 930500105-A1
Setting Up Your Computer
ETHERNET CONNECTION
In case you already established a connection with your Router a first time and/or
you do need to set up manually a connection to your Router, please follow the
instructions described in this chapter. You will be guided to set up an Ethernet
connection to the Router. To do so, first you have to verify the existence of a
TCP/IP protocol stack and, then, according to your Operating System, to estab-
lish an Ethernet connection to it. This connection will require you to enable your
computer to receive from the Router its own IP Address automatically: in such a
case, the Router acts like the DHCP server in your local network.
ETHERNET CONNECTION
>> TCP/IP PROTOCOL
INSTALLATION
This procedure requires the TCP/IP protocol installed on your computer. Refer
to the following chapters and to your Windows or MacOS operating systems
manuals.
Microsoft Windows 98SE, ME, 2000.
1.
Put in the CD-ROM drive your Windows installation CD-ROM
2.
Starting from
Start -> Settings -> Control Panel -> Network Control Panel
,
make a double click on the
Network
icon
3.
Select
Configuration -> TCP/IP
and then click on the
Add
button
4.
Select Protocols, click on
Add
button and choose Microsoft TCP/IP. Then
click on the
OK
button
5.
After the computer reboots, you're ready to configure the TCP/IP settings
Configure the Network adapter to obtain automatically an IP address
Microsoft Windows XP.
1.
Put in the CD-ROM drive your Windows installation CD-ROM
2.
Starting from
Start -> Settings -> Control Panel
make a double click on the
Network
icon.
3.
Select
Protocol
and click on the
Add
button. Select
Microsoft
and
TCP/IP
,
then click on the
OK
button.
4.
Configure the Network adapter to obtain automatically an IP address.
Apple MacOS 10.x.
TCP/IP is installed on a MacOS system as part of Open Transport.
ETHERNET CONNECTION
>> MS WINDOWS 98SE, ME,
2000
To configure TCP/IP on these Operating Systems follow these steps:
1.
Select
Start -> Settings -> Control Panel
and make a double click on the
Net-
work
icon.
2.
Select
Configuration ->TCP/IP
then click on
Properties
button.
Page 27 / 149
DISCUS™ Multiplay Wireless VoIP AG
(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
21
OGU 930500105-A1
Setting Up Your Computer
FIGURE 1.
Local Area Connection Properties
3.
Select the
IP Address
Tab, then check to obtain an automatically IP address.
Click on
OK
button.
FIGURE 2.
Internet Protocol (TCP/IP) Properties
Page 28 / 149
DISCUS™ Multiplay Wireless VoIP AG
(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
22
OGU 930500105-A1
Setting Up Your Computer
4.
A system reboot will be required to make the changes real.
ETHERNET CONNECTION
>> MS WINDOWS XP
To configure TCP/IP on MS Windows XP Operating System follow these steps:
5.
Select
Start -> Settings -> Control Panel
and make a double click on the
Net-
work
icon.
6.
Select
Protocols ->TCP/IP
then click on
Properties
button.
FIGURE 3.
Local Area Connection Properties
7.
Select the General Tab, then check to obtain an automatically IP address.
Click on
OK
button.
Page 29 / 149
DISCUS™ Multiplay Wireless VoIP AG
(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
23
OGU 930500105-A1
Setting Up Your Computer
FIGURE 4.
Internet Protocol (TCP/IP) Properties
ETHERNET CONNECTION
>> MAC OS 10.X
To configure TCP/IP on MAC OS 10.x follow these steps:
1.
Open the
Apple Menu -> System Preferences
and select Network.
2.
From the Show drop down list, according to the type of connection used,
select Built-in Ethernet.
3.
Select the
TCP/IP
tab.
4.
Select
DHCP
from the Configure pop-up menu to have a dynamic IP
address.
Page 30 / 149
DISCUS™ Multiplay Wireless VoIP AG
(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
24
OGU 930500105-A1
Setting Up Your Computer
FIGURE 5.
Network panel on MAC OS 10.x
5.
Click
Apply Now
.
6.
Click on the
Register
button to save the changes in the Control Panel.
7.
Enter
in the address bar of your browser to open the
DIS-
CUS™ Multiplay Wireless VoIP AG
Home Page.
USB CONNECTION
To connect your first Computer to the
DISCUS™ Multiplay Wireless VoIP AG
using USB port, you have to install the Router’s USB driver on your computer.
USB CONNECTION >> MS
WINDOWS
Before connecting the USB Cable to the USB Port of the
DISCUS™ Multiplay Wireless
VoIP AG
you have to run the setup software and to follow the instructions. Connect the USB
Cable only when required
from the installation software.
Only one Windows or Macintosh computer can be directly connected to the
DISCUS™ Mul-
tiplay Wireless VoIP AG
using the USB connection. Additional computers can be added to
your network using the others connection such as Ethernet or Wi-Fi.
Using Windows 98SE the system could require the Operating System installation CD-ROM.

Rate

4.5 / 5 based on 2 votes.

Popular Pirelli Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top