Pirelli VoIP-AG-v1-t-Annex-A-OT Router Manual PDF (Setup & Configuration Guide)

Page 21 / 149 Scroll up to view Page 16 - 20

DISCUS™ Multiplay Wireless VoIP AG

15

OGU 930500105-A1

Hardware Installation

FIGURE 4.

USB Cable Connection

2.

Launch USB driver setup available on

CD-ROM

.

To do this, browse till

x:\driver

folder (where “

x”

is the CD-ROM drive unit let-

ter); from this folder, according to your Operating System, launch the follow-

ing executable:

WINDOWS >> “x:\driver\windows\setup.exe”

MACOS X

>> “x:\driver\macosx\Package.sit”

and follow setup instructions.

3.

The setup software will invite you to plug the other end of the USB cable into

the USB socket of your computer

(see “USB Connection” ).

Don’t plug the other end of the USB cable until setup software will ask you to do it.

Page 22 / 149

DISCUS™ Multiplay Wireless VoIP AG

16

OGU 930500105-A1

Hardware Installation

To perform for the very first time a USB connection or an Ethernet one to the

Router, it is recommended you to launch the

setup

application on CD-ROM and

follow the step by step procedure.

In the case your provider will supply to you a SIP account, it will be needed to

properly connect the FXS and FXO ports. In detail you must follow these steps,

after micro filters installation:

1.

Connect one end of the first phone cable into the DSL filter socket identified

with a computer symbol

2.

Connect the other end of the first phone cable into the DSL socket of the

Router

3.

Connect one end of the second phone cable into the DSL filter socket identi-

fied with a phone symbol

4.

Connect the other end of the second phone cable into the WALL socket of

the Router (FXO connection)

5.

Connect a maximum of two analog phones to the Phone 1 or Phone 2 sock-

ets of the Router (FXS connection)

Page 23 / 149

DISCUS™ Multiplay Wireless VoIP AG

17

OGU 930500105-A1

Hardware Installation

FIGURE 5.

FXS and FXO connections

Connect to your PC with Ethernet or USB cables as described in the previous

steps.

Page 24 / 149

DISCUS™ Multiplay Wireless VoIP AG

18

OGU 930500105-A1

Hardware Installation

Page 25 / 149

Setting Up Your Computer

19

OGU 930500105-A1

Setting Up Your

Computer

The Router has the ability to dynamically allocate network addresses

to the computers on your network, using DHCP. However, your com-

puters need to be configured correctly for this to take place. To

change the configuration of your computers to allow this, follow the

instructions in this chapter.

INSTALL SOFTWARE

The very first time you set up your computer, we recommend you to

use setup software available on CD-ROM.

Setup software offers a guided product tour, a step by step hardware

installation guide, a software installation guide and setup depending

on your connection choice (USB or ETHERNET) and a driven user

registration with DSL Internet connection line check.

Setup software allows, for supported Microsoft Windows Operating

Systems, to setup automatically your computer Ethernet settings.

To launch Setup, insert Setup software CD-ROM in CD-ROM unit: if

the autoplay function is enabled it will start automatically, otherwise

click once on the “

Run...

” item in “

Start”

menu. In the opened panel

type “

x:\install.exe

” where

x

is your CD-ROM drive letter.

Before installing the

DISCUS™ Multiplay Wireless VoIP AG

software please close all appli-

cations to avoid any conflict.

Rate

Popular Pirelli Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share