1. Home
    2. /
  2. Manuals
    3. /
  3. Pirelli
    4. /
  4. DRG-A225G
    5. /
  5. 4
Page 16 / 35 Scroll up to view Page 11 - 15
DISCUS™ DRG A225G
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
18
SETUP WIZARD
The Router setup program is web based, which means that it is accessed
through your web browser.
To access to Router’s web server:
1. Launch your web browser on the computer
2. Enter the following URL in the location or address field of your browser:
The Router comes with a default IP address (192.168.1.254). If you change it, please take note of the
new Router’s IP address, otherwise a “Reset to Factory Default” operation should be done to be able
to access again to the Router.
Access to DSL router configuration pages is controlled through user accounts.
The default one is the
user
account
The default username and password are both set to “3play”. It is recommended to change these de-
fault values. Make sure you remember your user name and password, since this is the only way you
will be able to manage your Router
The
Setup Wizard
enables speedy and accurate configuration of your Internet
connection and other important parameters.
FIGURE 5.
Setup Wizard Panel
To go on with the Setup wizard, press the
NEXT
button.
Downloaded from
www.Manualslib.com
manuals search engine
Page 17 / 35
DISCUS™ DRG A225G
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
19
ISP Parameters
To activate your internet connection, you should insert the data provided by
your ISP. Please insert the user name and the Password.
FIGURE 6.
ISP Parameters Panel
Wireless
This page allows you to enable the wireless functionality of the router. For addi-
tional information please refer to chapter “Wireless”.
FIGURE 7.
Wireless Panel
Firewall
This page allows you to enable the firewall functionality of the router. The de-
vice provides extensive firewall protection by restricting connection parameters
to limit the risk of hacker attack, and defending against a wide array of common
attacks. However, for applications that require unrestricted access to the Inter-
net, you can configure a specific client/server as a demilitarized zone (DMZ).
Downloaded from
www.Manualslib.com
manuals search engine
Page 18 / 35
DISCUS™ DRG A225G
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
20
FIGURE 8.
Firewall Panel
Confirm
Check that all entered data are correct and then press the
FINISH
button to
save your data on the Router and, if everything has been properly set, to start
surfing.
FIGURE 9.
Confirm Panel
Downloaded from
www.Manualslib.com
manuals search engine
Page 19 / 35
DISCUS™ DRG A225G
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
21
WIRELESS
The gateway can be quickly configured as a wireless access point by setting the
service set identifier (SSID) and channel number. It also supports encryption
and client filtering.
Channel and SSID
This page allows you to define the SSID and the Channel ID for wireless con-
nection. These parameters are used for the mobile stations to connect to this
access point. You must specify a common radio channel and SSID (Service Set
ID) to be used by the Router and all of its wireless clients. Be sure you config-
ure all of its clients to the same values
Table 2 Channel and SSID Parameters Table
Parameter
Description
SSID
Service Set ID. The SSID must be the same on the
VoIP Router and all of its wireless clients.
SSID Broadcast
Enable or disable the broadcasting of the SSID.
Disabling SSID broadcast will provide increased
security by hiding the SSID of your wireless net-
work.
Wireless Mode
This device supports both 11g and 11b wireless
networks. Make your selection depending on the
type of wireless network that you have. You may
use “Mixed (11b+11g)” to provide compatibility with
both 11b and 11g wireless clients.
Channel
The radio channel used by the wireless router and
its clients to communicate with each other. This
channel must be the same on the VoIP Router and
all of its wireless clients.The VoIP Router will
automatically assign itself a radio channel, or you
may select one manually.
Downloaded from
www.Manualslib.com
manuals search engine
Page 20 / 35
DISCUS™ DRG A225G
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
22
FIGURE 10.
Channel and SSID Panel
Wireless Security
To make your wireless network safe, you should turn on the security function.
The VoIP Router supports the following security mechanism:
•
WPA/WPA2
•
WPA2 Only
•
WEP
•
Disabled
To enable one of the above encryption methods, access the “security” pages
located at the following path: Wireless>>Security. By default the WPA/WAP2
method is enabled.
WPA/WPA2 and WPA2 Only
Wi-Fi Protected Access (WPA) combines temporal key integrity protocol (TKIP)
and 802.1x mechanisms. It provides dynamic key encryption and 802.1x au-
thentication service.
Wi-Fi Protected Access 2 (WPA2) is a product certification that is available
through the Wi-Fi Alliance. WPA2 certifies that wireless equipment is compati-
ble with the IEEE 802.11i standard. The WPA2 product certification formally re-
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4 / 5 based on 1 vote.

Popular Pirelli Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top