DISCUS™ DRG A124G

FIGURE 8

Clone MAC Address panel on WAN section

© (2008) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

40

OGU 930500195-A1

WAN Section

© (2008) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

LAN Section

OGU 930500195-A1

41

LAN Section

LAN

menu is to configure the

LAN IP address

,

VLAN binding

,

Ethernet port

speed

, to enable the DHCP server for dynamic client address allocation and to

set the IP address pool within a domain. In

Figure 1 a first section of the main

screen on

LAN

section is shown with available parameters.

FIGURE 1

LAN Main panel

DISCUS™ DRG A124G

Table 1

TABLE 1

List of parameters in LAN section

PARAMETER

DESCRIPTION

LAN IP

IP Address

The IP address of the Router

IP Subnet mask

The subnet mask of the network

DHCP server

To enable or disable the DHCP server function. By default the

DHCP server is enabled for automatic IP address assignment

to client devices

VLAN binding

LAN1 to LAN4

Select to set the LAN port to a specific VLAN

Port Configuration

LAN1 to LAN4

Set the port to Auto, 100 Full/Half or 10 Full/Half control

DHCP Server Parameters

DHCP Server ID

Enter the ID here

Lease Time

Select the time period between two IP addresses assignment

IP Address Pool

Start IP / End IP

Specify the start / end IP address of the DHCP pool. Do not

include the IP address of the Router in the client address pool.

If you change the pool range, make sure the first three octets

match the gateway’s IP address, i.e., 192.168.1.xxx

Domain Name

If your network uses a domain name, enter it here. Otherwise,

leave this field blank

LAN >> VLAN

The Router’s

VLAN

function can be used to create up to 4 VLAN profiles. Once

a VLAN profile is created, interfaces can be assigned to the

VLAN

profile

. This

is done by setting the

VLAN

binding

(see

Figure 2).

FIGURE 2

VLAN settings

© (2008) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

42

OGU 930500195-A1

LAN Section

DISCUS™ DRG A124G

Only interfaces of IEEE 802 bridging type (LAN ports 1-4 and 1483 Bridging PVC’s) can be assigned

to a VLAN.

Click

Add VLAN

button on the VLAN panel to add a new VLAN profile. To mod-

ify existing VLANs, click the

Edit

button on

Configure

field related to VLAN list.

FIGURE 3

VLAN profile configuration

TABLE 2

List of parameters on VLAN settings

PARAMETER

DESCRIPTION

Description

Enter a description for the VLAN group, for example: Admin’s

PC

IP address

Enter IP address for the VLAN

Subnet Mask

Enter Subnet Mask address for the VLAN

NAT Domain

To set the NAT Domain to private or public

IGMP Snooping

By enabling it, the feature that allows an Ethernet switch to

“listen in” on the IGMP conversation between hosts and rou-

ters will be turned on

IGMP Querier

By enabling this function, it will send out periodic IGMP que-

ries

© (2008) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

LAN Section

OGU 930500195-A1

43

DISCUS™ DRG A124G

© (2008) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

44

OGU 930500195-A1

LAN Section

This Page has been intentionally left blank