1. Home
    2. /
  2. Manuals
    3. /
  3. PCI
    4. /
  4. BLW-54MF
    5. /
  5. 7
Page 31 / 78 Scroll up to view Page 26 - 30
2
26
BLW-54MF
œ
Auto-reconnect
Ĉ
When BLW-54MF disconnects with your xDSL
service, you can chose to reconnect online automatically, manually
or connect-on-demand. If you choose
ņ
Always-On
Ň
, BLW-54MF
Wireless Router will automatically reconnect to your ISP when you
restart the system or the connection is stopped.
ņ
Manual
Ň
means you
have to reconnect through your own configuration.
ņ
Connect-On-
Demand
Ň
means when there is a need (e.g. open a web browser), and
then the system may reconnect.
œ
Idle Time Out
Ĉ
Idle Time Out means a period of idle time before
you go offline. Enter a maximum period of time (minutes) to define the
maximum idle time. If the idle time is above the defined maximum idle
time, it will go offline immediately. You can set the value to be 0 or Auto
Reconnect to disable this function.
œ
MTU
Ĉ
MTU means
Maximum Transmission Unit,
the largest physical
packet size, measured in bytes, which a network can transmit. The
default value is 1400. Please set up the MTU according to your system
environment. Only enter a new MTU when your ISP requires, otherwise,
please leave it as the default setting. When using PPPoE connection, you
may need to change MTU settings to maintain the connection with your
ISP, however, if the incorrect value was entered, you may be unable to
access certain websites. Reducing the packet size can help connecting to
certain websites or speeding up the transmission rate.
œ
Cancel
Ĉ
If you do not want to configure this setting right now, click this
button to exist this page.
œ
Apply
Ĉ
Click this button to save/apply the settings and restart the
system.
Page 32 / 78
2
27
Chapter 2 Basic Setup & Configuration
Ɩ
L2TP
Layer 2 Tunneling Protocol (L2TP) is a tunneling protocol used to
support virtual private network. L2TP is original from Cisico
Ņ
s Layer
2 Forwarding (L2F) and Microsoft
Ņ
s Point-to-Point Tunneling Protocol
(PPTP). L2TP provides additional security features other than PPTP. L2TP
acts as data link layer protocaol for tunneling network traffic between
clients and VPN server over an Internet. It builds up Point-to-Point
Protocol (PPP) sessions within an L2TP tunnel.
œ
WAN IPAddress
Ĉ
Please choose the service provided by your ISP.
œ
IPAddress
Ĉ
Enter the IP address provided by your ISP.
œ
Subnet Mask
Ĉ
Enter the Subnet Mask address provided by your ISP.
œ
GateWay
Ĉ
Enter the default Gateway address provided by your ISP.
œ
DNS 1~3
ĈΞ
You may enter the first, second, and third DNS Server
provided by your ISP.
œ
Server IP/Name
Ĉ
Please enter the VPN Server IP and its Name.
œ
L2TPAccount
Ĉ
Please enter your L2TP Account number.
œ
L2TP Password
Ĉ
Please enter the Password collocated with your L2TP
Account.
œ
Verify Password
Ĉ
Enter your Password again for verification.
Page 33 / 78
2
28
BLW-54MF
œ
Auto-reconnect
Ĉ
When BLW-54MF disconnects with your xDSL
service, you can chose to reconnect online automatically, manually
or connect-on-demand. If you choose
ņ
Always-On
Ň
, BLW-54MF
Wireless Router will automatically reconnect to your ISP when you
restart the system or the connection is stopped.
ņ
Manual
Ň
means you
have to reconnect through your own configuration.
ņ
Connect-On-
Demand
Ň
means when there is a need (e.g. open a web browser), and
then the system may reconnect.
œ
Idle Time Out
Ĉ
Idle Time Out means a period of idle time before
you go offline. Enter a maximum period of time (minutes) to define the
maximum idle time. If the idle time is above the defined maximum idle
time, it will go offline immediately. You can set the value to be 0 or Auto
Reconnect to disable this function.
œ
MTU
Ĉ
MTU means
Maximum Transmission Unit,
the largest physical
packet size, measured in bytes, which a network can transmit. The
default value is
1400
. Please set up the MTU according to your system
environment. Only enter a new MTU when your ISP requires, otherwise,
please leave it as the default setting. When using PPPoE connection, you
may need to change MTU settings to maintain the connection with your
ISP, however, if the incorrect value was entered, you may be unable to
access certain websites. Reducing the packet size can help connecting to
certain websites or speeding up the transmission rate.
œ
Cancel
Ĉ
If you do not want to configure this setting right now, click this
button to exist this page.
œ
Apply
Ĉ
Click this button to save/apply the settings and restart the
system.
Page 34 / 78
2
29
Chapter 2 Basic Setup & Configuration
Ɩ
BigPond Cable
Telstra Bigpond is the largest ISP in Australia, so the BigPond Cable is
mainly used in Australia.
œ
User Name
Ĉ
Please enter the User Name/Account provided by your
ISP. (case-sensitive)
œ
Password
Ĉ
Please enter the Password provided by your ISP. (case-
sensitive)
œ
Verify Password
Ĉ
Please enter the Password again.
œ
Server IP/Name
Ĉ
Please enter the Server IP and its Name provided by
the ISP. (optional)
œ
Auth Server
Ĉ
Please scroll down the list to select the authentication
server you use.
œ
MAC Address
Ĉ
The default MAC address of BLW-54MF is the
Network Interface Card's (NIC) MAC address on the WAN side. If you
were asked to use the NIC provided by the ISP, you may click
ņ
Clone
MAC Address
Ň
and enter the MAC address of NIC provided by the
ISP. We do not suggest you to change the default MAC address, if your
ISP does not ask you to change it.
œ
Cancel
Ĉ
If you do not want to configure this setting right now, click this
button to exist this page.
œ
Apply
Ĉ
Click this button to save/apply the settings and restart the
system.
Page 35 / 78
2
30
BLW-54MF
5.3 Password
The default User Name of BLW-54MF Wireless Router is
ņ
admin
Ň
and Password is
ņ
admin.
Ň
It is recommended that you should change
the default password to have better protection over the router and the
LAN. You must memorize the password set by you to enter the system;
otherwise, you have to restore the whole systems and then configure the
settings again.
œ
Administrator
Ĉ
Enter the Password for the Administrator. (Enter 15
alphanumeric characters at most.)
œ
User
Ĉ
Enter the Password collocated with the User account. (Enter 15
alphanumeric characters at most.) The default user password is
null/no
password
which means users just need to enter
ņ
user
Ň
for the account,
and do not need to enter password to get in.
œ
Confirm Password
Ĉ
Enter the Password again for verification.
œ
Cancel
Ĉ
If you do not want to configure this setting right now, click this
button to exist this page.
œ
Apply
Ĉ
Click this button to save/apply the settings and restart the
system.
In this manual,
ņ
User
Ň
refers to people who can use BLW-
54MF Wireless Broadband Router. And
ņ
Administrator
Ň
means
someone who can configure BLW-54MF Wireless Broadband
Router and can provide limits of authority to others.

Rate

3.5 / 5 based on 2 votes.

Popular PCI Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top