1. Home
    2. /
  2. Manuals
    3. /
  3. Paradyne
    4. /
  4. 6381-A4
    5. /
  5. 3
Page 11 / 116 Scroll up to view Page 6 - 10
2-1
C
HAPTER
2
I
NSTALLATION
Before installing the ADSL Router, verify that you have all the items listed
under the Package Contents list. If any of the items are missing or
damaged, contact your local distributor. Also be sure that you have all the
necessary cabling before installing the ADSL Router. After installing the
ADSL Router, refer to “Configuring the ADSL Router” on page 4-1.
Package Contents
After unpacking the ADSL Router, check the contents of the box to be
sure you have received the following components:
•
Ozenda 11g Wireless ADSL Firewall Router
•
Power adapter
•
One Category 5 Ethernet cable (RJ-45)
•
Telephone patch cable (RJ-11)
•
Microfilter/Splitter
•
Quick Starter Guide
•
Manual CD
Immediately inform your dealer in the event of any incorrect, missing, or
damaged parts. If possible, please retain the carton and original packing
materials in case there is a need to return the product.
Downloaded from
www.Manualslib.com
manuals search engine
Page 12 / 116
I
NSTALLATION
2-2
System Requirements
You must meet the following minimum requirements:
•
ADSL line installed by your Internet Service Provider.
•
A PC using a fixed IP address or dynamic IP address assigned via
DHCP, as well as a gateway server address and DNS server address
from your service provider.
•
A computer equipped with a 10/100 Mbps network adapter, a
USB-to-Ethernet converter or an IEEE 802.11g wireless network
adapter.
•
TCP/IP network protocols installed on each PC that will access the
Internet.
•
A Java-enabled web browser, such as Microsoft Internet Explorer 5.5
or above, installed on one PC at your site for configuring the ADSL
Router.
Hardware Description
The ADSL Router contains an integrated ADSL modem and connects to
the Internet or to a remote site using its RJ-11 WAN port. It can be
connected directly to your PC or to a local area network using any of the
four Fast Ethernet LAN ports.
Data passing between devices connected to your local area network can
run at up to 100 Mbps over the Fast Ethernet ports and 54 Mbps over the
built-in wireless network adapter.
The ADSL Router includes an LED display on the front panel for system
power and port indications that simplifies installation and network
troubleshooting. It also provides the following ports on the rear panel:
Downloaded from
www.Manualslib.com
manuals search engine
Page 13 / 116
H
ARDWARE
D
ESCRIPTION
2-3
Figure 2-1.
Rear Panel
Item
Description
LAN Ports
Fast Ethernet ports (RJ-45). Connect devices on your local area
network to these ports (i.e., a PC, hub, or switch).
Power
button
Press this button to turn on/turn off the ADSL Router.
Reset Button
Use this button to reset the power and restore the default
factory settings. To reset without losing configuration settings,
see “Reset” on page 4-58.
Power Inlet
Connect the included power adapter to this inlet.
Warning
: Using the wrong type of power adapter may damage
the ADSL Router.
ADSL Port
WAN port (RJ-11). Connect your ADSL line to this port.
Downloaded from
www.Manualslib.com
manuals search engine
Page 14 / 116
I
NSTALLATION
2-4
LED Indicators
The power and port LED indicators on the front panel are illustrated by
the following figure and table.
Figure 2-2.
Front Panel
LED
Status
Description
PWR
On
The ADSL Router is receiving power. Normal
operation.
Off
Power off or failure.
ADSL
On
ADSL connection is functioning correctly.
Flashing
The ADSL Router is establishing an ADSL link.
Off
ADSL connection is not established.
PPP
On
PPP connection is on.
Off
PPP connection is off.
WL
Flashing
The WLAN port is sending or receiving data.
LAN
(4 LEDs)
On
Ethernet connection is established.
Flashing
The indicated LAN port is sending or receiving data.
Off
There is no LAN connection on the port.
Downloaded from
www.Manualslib.com
manuals search engine
Page 15 / 116
ISP S
ETTINGS
2-5
ISP Settings
Please collect the following information from your ISP before setting up
the
ADSL Router
:
•
ISP account user name and password
•
Protocol, encapsulation and VPI/VCI circuit numbers
•
DNS server address
•
IP address, subnet mask and default gateway (for fixed IP users only)
Connect the System
The ADSL Router can be positioned at any convenient location in your
office or home. No special wiring or cooling requirements are needed. You
should, however, comply with the following guidelines:
•
Keep the ADSL Router away from any heating devices.
•
Do not place the ADSL Router in a dusty or wet environment.
You should also remember to turn off the power, remove the power cord
from the outlet, and keep your hands dry when you install the ADSL
Router.
Connect the ADSL Line
Connect the supplied RJ-11 cable from the ADSL Microfilter/Splitter to
the ADSL port on your ADSL Router. When inserting an ADSL RJ-11
plug, be sure the tab on the plug clicks into position to ensure that it is
properly seated.
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4 / 5 based on 2 votes.

Popular Paradyne Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top