1. Home
    2. /
  2. Manuals
    3. /
  3. Option
    4. /
  4. GlobeSurfer-II
    5. /
  5. 22
Page 106 / 126 Scroll up to view Page 101 - 105
106
GlobeSurfer
®
II 1.8 - 7.2 - 7.2 S
REFERENCE MANUAL
e.
Make sure that the ‘Edit Properties’ check box is checked (see gure 7.213) and click the
‘Finish’ button.
Figure 6.81 Completing the IP Security Policy Wizard
f.
On the ‘GlobeSurfer
®
II Connection Properties’ window that will appear (see Figure 6.82), click ‘OK’.
Figure 6.82 GlobeSurfer
®
II Connection Properties
2.
Building Filter List 1 -Windows XP to GlobeSurfer
®
II:
a.
In the ‘Local Security Settings’ window, right-click the new ‘GlobeSurfer
®
II Connection’ policy,
created in the previous step, and select Properties. The Properties window will appear (see
Figure 6.82)
b.
Deselect the ‘Use Add Wizard’ check box and click the ‘Add’ button to create a new IP Security
rule. The ‘New Rule Properties’ window will appear (see Figure 6.83).
Page 107 / 126
107
GlobeSurfer
®
II 1.8 - 7.2 - 7.2 S
REFERENCE MANUAL
Figure 6.83 New Rule Properties
c.
Under the IP Filter List tab, click the ‘Add’ button. The ‘IP Filter List’ window will appear (see
Figure 6.84).
Figure 6.84 IP Filter list
d.
Enter the name ”Windows XP to GlobeSurfer
®
II” for the filter list, deselect the ‘Use
AddWizard’ check box, and click the ‘Add’ button. The ‘Filter Properties’ window will appear
(see Figure 6.85).
Page 108 / 126
108
GlobeSurfer
®
II 1.8 - 7.2 - 7.2 S
REFERENCE MANUAL
Figure 6.85 Filter properties
e.
In the ‘Source address’ combo box, select ‘My IP Address’.
f.
In the ‘Destination address’ combo box, select ‘A Specific IP Subnet’. In the ‘IP Address’ field
enter the LAN Subnet (<GlobeSurfer
®
II lan subnet>), and in the ‘Subnet mask’ field enter
255.255.255.0.
g.
Click the Description tab if you would like to enter a description for your filter.
h.
Click the ‘OK’ button. Click ‘OK’ again in the ‘IP Filter List’ window to save the settings.
3.
Building Filter List 2 - GlobeSurfer
®
II to Windows XP:
a.
Under the IP Filter List tab of the ‘New Rule Properties’ window, click the ‘Add’ button. The ‘IP
Filter List’ window will appear (see Figure 6.84).
b.
Enter the name ” GlobeSurfer
®
II to Windows XP” for the filter list, deselect the ‘Use
AddWizard’ check box, and click the ‘Add’ button. The ‘Filter Properties’ window will appear
(see Figure 6.86).
Figure 6.86 Filter properties
c.
In the ‘Source address’ combo box, select ‘A Specific IP Subnet’. In the ‘IP Address’ field
enter the LAN Subnet (<GlobeSurfer
®
II lan subnet>), and in the ‘Subnet mask’ field enter
255.255.255.0.
d.
In the ‘Destination address’ combo box, select ‘My IP Address’.
Page 109 / 126
109
GlobeSurfer
®
II 1.8 - 7.2 - 7.2 S
REFERENCE MANUAL
e.
Click the Description tab if you would like to enter a description for your filter.
f.
Click the ‘OK’ button. Click ‘OK’ again in the ‘IP Filter List’ window to save the settings.
4.
Configuring Individual Rule of Tunnel 1 (Windows XP to GlobeSurfer
®
II):
a.
Under the ‘IP Filter List’ tab of the ‘New Rule Properties’ window, select the ‘Windows XP to
GlobeSurfer
®
II’ radio button (see Figure 6.87).
Figure 6.87 IP Filter List
b. Click the ‘Filter Action’ tab (see Figure 6.88).
Figure 6.88 Filter Action
c.
Select the ‘Require Security’ radio button, and click the ‘Edit’ button. The ‘Require Security
Properties’ window will appear (see Figure 6.89).
Figure 6.89 Require Security Properties
Page 110 / 126
110
GlobeSurfer
®
II 1.8 - 7.2 - 7.2 S
REFERENCE MANUAL
d.
Verify that the ‘Negotiate security’ option is enabled, and deselect the ‘Accept unsecured
communication, but always respond using IPSec’ check box. Select the ‘Session key Perfect
Forward Secrecy (PFS)’ (the PFS option must be enabled on GlobeSurfer
®
II), and click the OK
button.
e.
Under the ‘Authentication Methods’ tab, click the Edit button. The ‘Edit Authentication Method
Properties’ window will appear (see Figure 6.90).
Figure 6.90 Edit Authentication Method Properties
f. Select the ‘Use this string (preshared key)’ radio button, and enter a string that will be used as
the key (for example, 1234). Click the ‘OK’ button.
g. Under the ‘Tunnel Setting’ tab, select the ‘The tunnel endpoint is specified by this IP Address’
radio button, and enter <GlobeSurfer
®
II wan ip> (see Figure 6.91).
Figure 6.91 Tunnel Setting

Rate

4 / 5 based on 2 votes.

Popular Option Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top