41

Connection Log

Click

Connection Log

to access the WWAN settings connection log. The

Connection Log

has the

following:

•

Date/Time

— The date/time the device was detected by the network.

•

Client IP Address

— The client IP address for the connected device.

•

Destination

— The destination IP address.

•

Port

— Identifies the port used for the connection.

•

Type

— This can be

UDP

or

TCP

.

42

WWAN Log

Click

WWAN Log

to access the WWAN log. The

WWAN Log

records network events. This data is useful

for troubleshooting. Click this button to view the log data in a new window.

43

WWAN Settings

To configure the settings, follow these steps:

➊

Select the device

connection method from the Auto-connect drop-down menu. The

connection choices are

Auto-connect

,

Auto-connect except with roaming

, or

Manual

.

➋

Global roaming is enabled by default when the

Auto-connect

option in enabled. To disable

global roaming, select either the

Auto -connect except when Roaming

or

Manual

option, and click

the

Disable Roaming

checkbox..

NOTE

The APN and HSPA APN are Access Point Names that the device uses to connect to the Internet.

These are automatically provided by your wireless carrier. Entering an incorrect name in either of

these fields will prevent Internet access.

➌

Select the WWAN Preferred Mode from the WWAN Preferred Mode drop-down menu to

select the type of technology you want to use to connect to the Internet. The Preferred

Mode choices are

Global, CDMA Auto (1XRTT, EVDO), LTE only, 1XRTT only, EVDO only,

or

HSPA only

.

➍

To display the HSPA/GSM Mode menu options, select

HSPA only

from the

WWAN Preferred

Mode drop-down menu.

44

➎

Select the HSPA/GSM Mode from the HSPA/GSM Mode drop-down menu. The choices

include

HSPA/UMTS + GSM (GPRS EDGE), HSPA/UMTS only,

or

GPRS/EDGE only

.

➏

Click

Save

to apply and save your changes.

Buttons

•

Save

— Click this button to save changes.

•

Cancel

— Click this button to cancel any changes.

45

SIM

The SIM menu takes you to the SIM screen. The SIM screen gives you settings and information about

MiFi 4620L's SIM card. The SIM screen has the following section:

•

SIM Operations

(See

SIM Operations

on page 45.)

SIM Operations

The SIM Operations section has the following:

•

SIM Status

— Indicates the current SIM status, usually one of the following: no SIM, invalid

SIM, PIN lock, PUK lock, ready, or SIM error.

•

SIM Lock Status

— Locked or unlocked.

•

SIM Operation

— Lock SIM or unlock SIM.

•

Current PIN

— Required to lock SIM.

IMPORTANT

Entering an incorrect PIN will lock the SIM.

Buttons

•

Apply

— Click this button to apply any changes.