Page 41 / 342
Scroll up to view Page 36 - 40
Setting Up the Nokia IP45 Security Platform with Microsoft Windows 98 or Millennium Operating Systems
Nokia IP45 Security Platform User’s Guide v4.0
41
To make TCP/IP settings
1.
In the Network window, double-click the TCP/IP Service for the Ethernet card on your
computer (TCP/ IP > PCI Fast Ethernet DEC 21143 Based Adapter).
The TCP/IP Properties window opens.
2.
Click the Gateway tab and delete any installed gateways.
3.
Click the DNS Configuration tab and click Disable DNS.
Page 42 / 342
2
Installing the Nokia IP45 Security Platform
42
Nokia IP45 Security Platform User’s Guide v4.0
4.
Click the IP Address tab, and click Obtain an IP address automatically.
Page 43 / 342
Setting Up the Nokia IP45 Security Platform with Microsoft Windows XP and 2000 Operating Systems
Nokia IP45 Security Platform User’s Guide v4.0
43
Note
Nokia recommends that you use DHCP to assign IP addresses instead of assigning a static
IP address to your computer. To assign a static IP address, click Specify an IP address and
enter an IP address in the range of
192.168.10.129 to 254. Enter 255.255.255.0 as the
Subnet Mask. Click OK to save the new settings.
5.
Click Yes when
the
Do you want to restart your computer?
message appears.
Your computer must restart for the new settings to take effect.
Your computer is now ready to access the IP45.
Setting Up the Nokia IP45 Security Platform with
Microsoft Windows XP and 2000 Operating Systems
Windows XP has an Internet connection firewall option. Nokia recommends that you disable the
firewall option if you are using the Nokia IP45.
To check for TCP/IP installation
1.
Choose Start > Settings > Control Panel (in Windows XP Start > Control Panel from.)
The Control Panel window opens.
2.
Double-click the Network and Dial-up Connections icon (in Windows XP double-click the
Network Connections
icon).
Page 44 / 342
2
Installing the Nokia IP45 Security Platform
44
Nokia IP45 Security Platform User’s Guide v4.0
The Network and Dial-up Connections window opens.
3.
Right-click the Local Area Connection icon and select Properties from the drop-down list.
The Local Area Connection Properties window opens.
4.
Check for TCP/IP in the Component list and whether it is configured with the Ethernet card
installed on your computer.
If TCP/IP does not appear in the Components list, install it as described in the section
“To
install TCP/IP”
on page 39. If TCP/IP is already installed, skip the next section.
Page 45 / 342
Setting Up the Nokia IP45 Security Platform with Microsoft Windows XP and 2000 Operating Systems
Nokia IP45 Security Platform User’s Guide v4.0
45
To install TCP/IP
1.
In the Local Area Connection Properties window, click Install.
The Select Network Component Type window opens.
2.
Choose Protocol and click Add.
The Select Network Protocol window opens.
3.
In the Select Network Protocol window, choose Internet Protocol (TCP/IP) and click OK.
The TCP/IP protocol is installed on your computer.
19216811.live