Page 36 / 342
Scroll up to view Page 31 - 35
1
Introduction
36
Nokia IP45 Security Platform User’s Guide v4.0
Table 10
Front Panel of the Nokia IP45
Label
Description
PWR
Off: Device not powered on
Green Solid: Device is on
STAT
Off: Device off
Green solid: Device passed hardware test and finished booting.
Red solid: Hardware error
Amber solid: Booting
Green blinking: Device passed hardware test and is fully booted.
Device is at its default state. First-time password is not set.
Red blinking: Software error
Amber blinking: Device is performing a function such as setting
factory defaults, loading firmware or loading an exported
configuration.
LAN
DMZ
WAN
Off: No connection
Green solid: Interface connected and auto-negotiated at 10 Mbps
Amber solid: Interface connected and auto-negotiated at 100
Mbps
Amber/Green blinking: Traffic passing through the interface
Page 37 / 342
Nokia IP45 Security Platform User’s Guide v4.0
37
2
Installing the Nokia IP45 Security
Platform
This chapter describes how to set up and install the Nokia IP45 security platform in a networking
environment. The chapter includes the following topics:
±
Before you Install the Nokia IP45 Security Platform
±
Setting Up the Nokia IP45 Security Platform with Microsoft Windows 98 or Millennium
Operating Systems
±
Setting Up the Nokia IP45 Security Platform with Microsoft Windows XP and 2000
Operating Systems
±
Setting Up the Nokia IP45 Security Platform with an Apple Computer
±
Connecting the Nokia IP45 Security Platform to the Network
±
Installing your Network
Before you Install the Nokia IP45 Security Platform
Before you connect and set up the Nokia IP45 security platform, you must check the following:
±
Whether TCP/IP is installed on your computer.
±
The TCP/IP settings of your computer, to ensure that it obtains its IP address automatically.
The following sections guide you through the TCP/IP setup and installation process.
Page 38 / 342
2
Installing the Nokia IP45 Security Platform
38
Nokia IP45 Security Platform User’s Guide v4.0
Setting Up the Nokia IP45 Security Platform with
Microsoft Windows 98 or Millennium Operating Systems
If you are using Windows 98 or Windows ME, configure TCP/IP as follows.
To check for TCP/IP Installation
1.
Choose Start > Settings > Control Panel.
The Control Panel window opens.
2.
Double-click the Network
icon.
The Network window opens.
Page 39 / 342
Setting Up the Nokia IP45 Security Platform with Microsoft Windows 98 or Millennium Operating Systems
Nokia IP45 Security Platform User’s Guide v4.0
39
In the Network window, check if TCP/IP appears in the network components list and if it is
already configured with the Ethernet card installed on your computer.
If TCP/IP is already installed and configured on your computer, skip the following procedure
about how to install TCP/IP.
To install TCP/IP
1.
In the Network window, click Add.
The Select Network Component Type window opens.
2.
Choose Protocol and click Add.
Page 40 / 342
2
Installing the Nokia IP45 Security Platform
40
Nokia IP45 Security Platform User’s Guide v4.0
The Select Network Protocol window opens.
3.
In the Select Network Protocol window, choose Microsoft in Manufacturers and TCP/IP in
Network Protocols.
4.
Click OK.
If you are prompted for original Windows installation files, provide the installation CD and
relevant path, D:\win98, D:\win95, and so on.
5.
Restart your computer if prompted.
If you are connecting the IP45 to an existing LAN, consult your network manager/system
administrator for the correct configuration.
19216811.live