1. Home
    2. /
  2. Manuals
    3. /
  3. Netis
    4. /
  4. WF-2404
    5. /
  5. 12
Page 56 / 63 Scroll up to view Page 51 - 55
300Mbps Wireless-N Broadband Router
User Manual
55
2. Add MAC address you w
ant to control in the “MAC address” field (the format is
**-**-**-**-**-**
), then click “Add” button, and you will see the MAC address has displayed
in the MAC list.
3.
There are two items supplied, “Permit wireless connection for MAC address listed (other
s
are Denied)” and “Deny wireless connection for MAC address listed (others are Permitted)”,
Select the item you want, and click “Save” button.
4.8.4.
Domain Filtering
Figure 4-50
Status: the default is disable.
“DNS filter”
is able to filter certain domain name such as
www.sina.com
.
Rule: you can select permit or deny. The default is permit.
DNS Filter Key words:
Input website name or Domain name in the “DNS Key Words”
field, such as www.163.com.
Follow these steps to set DNS filter:
1. You can select “
enable
” and click “Save” to enable “DNS Filter” function. This is only the
first step, you should continued to create appropriate rules for “DNS Filter”.
2. Input DNS Filter Key words.
3. There are
two items supplied, “Permit
through the router for DNS Key words listed, others
are d
enied” and “
Deny through the router for DNS Key words listed, others are permitted
”,
Select the item you want, and click “Save” button
.
4. If you want to delete certain i
tem on the list, select appropriate item on the list, click “delete”
Page 57 / 63
300Mbps Wireless-N Broadband Router
User Manual
56
to delete it.
4.9.
Static Routing
Most of broadband router and wireless router are using NAT mode, so this feature is designed
for most common network environment.
Figure 4-51
Destination Network or IP Address: Specify a certain destination Network or IP address
which static route forward to.
Subnet Mask: Subnet mask is used for distinguish Network portion and Host portion for an
IP address.
Next-hop IP Address: This is an IP address of the next-hop device (and also is the gateway
address for local host) that allows forwarding data between router and remote network or
host.
Routing Table:
You can check out all current route items, click “delete” button to delete an
route item existed in routing table.
Page 58 / 63
300Mbps Wireless-N Broadband Router
User Manual
57
4.10.
QOS Settings
Figure 4-52
Status: QOS switch.
Automatic Uplink Speed: Router adjusts uplink bandwidth automatically.
Manual Uplink Speed (Kbps): User configures uplink bandwidth manually.
IP Address: Set the IP address range for restricted hosts.
Minimum bandwidth: setup uplink and downlink bandwidth.
Maximum bandwidth: setup uplink and downlink bandwidth.
4.11.
Dynamic DNS
The DDNS feature allows you using domain name (not IP address) to access Internet. Before
you can use this feature, you need to register an account for DDNS service at DDNS service
providers, such as “roay.cn”,
”TZO.com”,
”DynDNS”. For more information, you can visit
Page 59 / 63
300Mbps Wireless-N Broadband Router
User Manual
58
Figure 4-53
DDNS Status: Current status of DDNS server.
DDNS Server Provider:
For example, if you want to use service of “roay.cn”, you have to
first register and accounts for it. Other DDNS service providers as the same.
Username, Password, Dynamic Domain Name: After register an DDNS account from
DDNS service providers, you will get “User Name”, “Password”,
”D
ynamic Domain
Name”, Input information in appropriate field
.
4.12.
System Tools
System management includes password setup, web Setup, upgrade, reboot, restore, WOL and
System time
4.12.1.
Firmware
Click "Browse..."button and select a File to upgrade, after you have selected the appropriate file,
click "Upgrade" button to execute upgrade procedure. Do not cut off the power supply during
the process of upgrading.
Figure 4-54
4.12.2.
Time Settings
You can choose the time server and the time zone for the system time.
Page 60 / 63
300Mbps Wireless-N Broadband Router
User Manual
59
Figure 4-55
4.12.3.
Password
The default username/password is guest/guest. To ensure the Router’s security,
it is suggested
that you change the default password to one of your choice, here enter a new password and then
Re-
enter it again to confirm your new password. Click “Save” button to save settings
.
Figure 4-56
4.12.4.
WOL
Input host MAC address, and then click button of "Wake up" to wake up the target host which in
the LAN.
Figure 4-57
4.12.5.
System Logs
Examine system logs. You can configure items shown in one Page, the default is 10.

Rate

3.5 / 5 based on 2 votes.

Popular Netis Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top