Page 41 / 48
Scroll up to view Page 36 - 40
Technical Specifications
37
Technical Specifications
Default Configuration Settings
This section provides factory default settings and technical specifications for the N150 Wireless
Router WNR1000.
Table 3.
Home Router Default Configuration Settings
Feature
Default Setting
Router Login
Router Login URL
http://www. routerlogin.net;
http://www
.
Login Name (case sensitive)
admin
Login Password (case sensitive)
password
Internet Connection
WAN MAC Address
Default hardware address (on label)
MTU Size
1500
Local Network
Router Lan IP address (the Gateway IP
address)
192.168.1.1
IP Subnet Mask
255.255.255.0
DHCP Server
Enabled
Time Zone
GMT
Time Zone Adjusted for Daylight Saving
Time
Disabled
Firewall
Inbound (communications coming in from
the Internet)
Disabled (bars all unsolicited requests except for
traffic on port 80, the http port)
Outbound (communications going out to
the Internet)
Enabled (all)
Page 42 / 48
38
Technical Specifications
Wireless
Wireless Communication
Enabled
SSID Name
NETGEAR
Security
Disabled
Broadcast SSID
Enabled
Transmission Speed
Auto
a
Country/Region
United States (North America only; otherwise varies
by country and region)
RF Channel
11 in North America, 13 in most other regions
Operating Mode
Up to 150 Mbps
Data Rate
Best
Output Power
Full
a. Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and net-
work overhead lower actual data throughput rate.
Table 3.
Home Router Default Configuration Settings (continued)
Feature
Default Setting
Page 43 / 48
Technical Specifications
39
Restoring the Default Password and Configuration
Settings
You can restore the factory default configuration settings that reset the router’s user name to
admin,
the password to
password,
and the IP address to
192.168.1.1
.
To restore the factory default configuration settings:
1.
Use a sharp object such as a pen or a paper clip to press and hold the restore factory settings
button, located on the rear panel of the router, for about 5 seconds, until the Power light begins
to blink (see
“Back Panel” on page 4
).
2.
Release the restore factory settings button, and wait for the router to restart, and for the Power
light to stop blinking and become solid green.
The factory default settings will be restored so that you can access the router from your Web
browser using the factory defaults.
This procedure will erase all the current configuration settings and restore the factory
defaults.
Page 45 / 48
Related Documents
41
Related Documents
This section provides links to reference documents that you can use to gain a more complete
understanding of the technologies used in your NETGEAR product.
Table 4.
Related Documents
Document
Link
Internet Networking and
TCP/IP Addressing
Preparing a Computer
for Network Access
Glossary
19216811.live