1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. WNDR4300v2
    5. /
  5. 7
Page 31 / 154 Scroll up to view Page 26 - 30
Specify Your Internet Settings
31
N750 WiFi Router
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED > Advanced Setup > IPv6
.
The IPv6 screen displays.
5.
In the
Internet Connection Type
list, select
6to4 Tunnel
.
The router automatically detects the information in the
Router’s IPv6 Address on LAN
field. This field shows the IPv6 address that is acquired for the router’s LAN interface. The
number after the slash (/) is the length of the prefix, which is also indicated by the
underline (_) under the IPv6 address. If no address is acquired, the field displays Not
Available.
6.
Select a Remote 6to4 Relay Router radio button:
•
Auto
. Your router uses any remote relay router that is available on the Internet. This
is the default setting.
•
Static IP Address
. Enter the static IPv4 address of the remote relay router. Your IPv6
ISP usually provides this address.
7.
Select an IP Address Assignment radio button:
•
Use DHCP Server
. This method passes more information to LAN devices but some
IPv6 systems might not support the DHCv6 client function.
•
Auto Config
. This is the default setting.
This setting specifies how the router assigns IPv6 addresses to the devices on your home
network (the LAN).
8.
(Optional) Select the
Use This Interface ID
check box and specify the interface ID to be
used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
9.
Click the
Apply
button.
Page 32 / 154
Specify Your Internet Settings
32
N750 WiFi Router
Your settings are saved.
Set Up an IPv6 Pass Through Internet Connection
In pass-through mode, the router works as a Layer 2 Ethernet switch with two ports (LAN and
WAN Ethernet ports) for IPv6 packets. The router does not process any IPv6 header packets.
To set up a pass-through IPv6 Internet connection:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type
or
.
A login screen displays.
3.
Enter the router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED > Advanced Setup > IPv6
.
The IPv6 screen displays.
5.
In the
Internet Connection Type
list, select
Pass Through
.
The screen adjusts, but no additional fields display.
6.
Click the
Apply
button.
Your settings are saved.
Set Up an IPv6 Fixed Internet Connection
To set up a fixed IPv6 Internet connection:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type
or
.
A login screen displays.
3.
Enter the router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED > Advanced Setup > IPv6
.
The IPv6 screen displays.
Page 33 / 154
Specify Your Internet Settings
33
N750 WiFi Router
5.
In the
Internet Connection Type
list, select
Fixed
.
6.
Configure the fixed IPv6 addresses for the WAN connection:
•
IPv6 Address/Prefix Length
. The IPv6 address and prefix length of the router WAN
interface.
•
Default IPv6 Gateway
. The IPv6 address of the default IPv6 gateway for the router’s
WAN interface.
•
Primary DNS Server
. The primary DNS server that resolves IPv6 domain name
records for the router.
•
Secondary DNS Server
. The secondary DNS server that resolves IPv6 domain
name records for the router.
Note:
If you do not specify the DNS servers, the router uses the DNS servers
that are configured for the IPv4 Internet connection on the Internet
Setup screen. (See
Manually Set Up the Internet Connection
on
page
22.)
7.
Select an IP Address Assignment radio button:
•
Use DHCP Server
. This method passes more information to LAN devices but some
IPv6 systems might not support the DHCv6 client function.
•
Auto Config
. This is the default setting.
This setting specifies how the router assigns IPv6 addresses to the devices on your home
network (the LAN).
8.
In the
IPv6 Address/Prefix Length
fields, specify the static IPv6 address and prefix length
of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
9.
Click the
Apply
button.
Your settings are saved.
Page 34 / 154
Specify Your Internet Settings
34
N750 WiFi Router
Set Up an IPv6 DHCP Internet Connection
To set up an IPv6 Internet connection with a DHCP server:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type
or
.
A login screen displays.
3.
Enter the router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED > Advanced Setup > IPv6
.
The IPv6 screen displays.
5.
In the
Internet Connection Type
list, select
DHCP
.
The router automatically detects the information in the following fields:
•
Router’s IPv6 Address on WAN
. This field shows the IPv6 address that is acquired
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length
of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
•
Router’s IPv6 Address on LAN
. This field shows the IPv6 address that is acquired
for the router’s LAN interface. The number after the slash (/) is the length of the prefix,
which is also indicated by the underline (_) under the IPv6 address. If no address is
acquired, the field displays Not Available.
6.
(Optional) In the
User Class (If Required)
field, enter a host name.
Most people can leave this field blank, but if your ISP gave you a specific host name,
enter it here.
7.
(Optional) In the
Domain Name (If Required)
field, enter a domain name.
Page 35 / 154
Specify Your Internet Settings
35
N750 WiFi Router
You can type the domain name of your IPv6 ISP. Do not enter the domain name for the
IPv4 ISP here. For example, if your ISP’s mail server is mail.xxx.yyy.zzz, type xxx.yyy.zzz
as the domain name. If your ISP provided a domain name, type it in this field. For
example, Earthlink Cable might require a host name of home, and Comcast sometimes
supplies a domain name.
8.
Select an IP Address Assignment radio button:
•
Use DHCP Server
. This method passes more information to LAN devices but some
IPv6 systems might not support the DHCv6 client function.
•
Auto Config
. This is the default setting.
This setting specifies how the router assigns IPv6 addresses to the devices on your home
network (the LAN).
9.
(Optional) Select the
Use This Interface ID
check box and specify the interface ID to be
used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
10.
Click the
Apply
button.
Your settings are saved.
Set Up an IPv6 PPPoE Internet Connection
To set up a PPPoE IPv6 Internet connection:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type
or
.
A login screen displays.
3.
Enter the router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED > Advanced Setup > IPv6
.
The IPv6 screen displays.

Rate

3.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top