1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. WNDR4300v2
    5. /
  5. 6
Page 26 / 154 Scroll up to view Page 21 - 25
Specify Your Internet Settings
26
N750 WiFi Router
-
Use Auto Detect for an IPv6 Internet Connection
on page
26
-
Use Auto Config for an IPv6 Internet Connection
on page
28
-
Set Up an IPv6 6rd Tunnel Internet Connection
on page
29
-
Set Up an IPv6 6to4 Tunnel Internet Connection
on page
30
-
Set Up an IPv6 Pass Through Internet Connection
on page
32
-
Set Up an IPv6 Fixed Internet Connection
on page
32
-
Set Up an IPv6 DHCP Internet Connection
on page
34
-
Set Up an IPv6 PPPoE Internet Connection
on page
35
6.
Click the
Apply
button.
Your changes take effect.
Requirements for Entering IPv6 Addresses
IPv6 addresses are denoted by eight groups of hexadecimal quartets that are separated by
colons. You can reduce any four-digit group of zeros within an IPv6 address to a single zero
or omit it. The following errors invalidate an IPv6 address:
•
More than eight groups of hexadecimal quartets
•
More than four hexadecimal characters in a quartet
•
More than two colons in a row
Use Auto Detect for an IPv6 Internet Connection
To set up an IPv6 Internet connection through auto detection:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type
or
.
A login screen displays.
3.
Enter the router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED > Advanced Setup > IPv6
.
The IPv6 screen displays.
Page 27 / 154
Specify Your Internet Settings
27
N750 WiFi Router
5.
In the
Internet Connection Type
list, select
Auto Detect
.
The router automatically detects the information in the following fields:
•
Connection Type
. This field indicates the connection type that is detected.
•
Router’s IPv6 Address on WAN
. This field shows the IPv6 address that is acquired
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length
of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
•
Router’s IPv6 Address on LAN
. This field shows the IPv6 address that is acquired
for the router’s LAN interface. The number after the slash (/) is the length of the prefix,
which is also indicated by the underline (_) under the IPv6 address. If no address is
acquired, the field displays Not Available.
6.
Select an IP Address Assignment radio button:
•
Use DHCP Server
. This method passes more information to LAN devices but some
IPv6 systems might not support the DHCv6 client function.
•
Auto Config
. This is the default setting.
This setting specifies how the router assigns IPv6 addresses to the devices on your home
network (the LAN).
7.
(Optional) Select the
Use This Interface ID
check box and specify the interface ID to be
used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
8.
Click the
Apply
button.
Your settings are saved.
Page 28 / 154
Specify Your Internet Settings
28
N750 WiFi Router
Use Auto Config for an IPv6 Internet Connection
To set up an IPv6 Internet connection through auto configuration:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type
or
.
A login screen displays.
3.
Enter the router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED > Advanced Setup > IPv6
.
The IPv6 screen displays.
5.
In the
Internet Connection Type
list, select
Auto Config
.
The router automatically detects the information in the following fields:
•
Router’s IPv6 Address on WAN
. This field shows the IPv6 address that is acquired
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length
of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
•
Router’s IPv6 Address on LAN
. This field shows the IPv6 address that is acquired
for the router’s LAN interface. The number after the slash (/) is the length of the prefix,
which is also indicated by the underline (_) under the IPv6 address. If no address is
acquired, the field displays Not Available.
6.
(Optional) In the
DHCP User Class (If Required)
field, enter a host name.
Most people can leave this field blank, but if your ISP gave you a specific host name,
enter it here.
Page 29 / 154
Specify Your Internet Settings
29
N750 WiFi Router
7.
(Optional) In the
DHCP Domain Name (If Required)
field, enter a domain name.
You can type the domain name of your IPv6 ISP. Do not enter the domain name for the
IPv4 ISP here. For example, if your ISP’s mail server is mail.xxx.yyy.zzz, type xxx.yyy.zzz
as the domain name. If your ISP provided a domain name, type it in this field. For
example, Earthlink Cable might require a host name of home, and Comcast sometimes
supplies a domain name.
8.
Select an IP Address Assignment radio button:
•
Use DHCP Server
. This method passes more information to LAN devices but some
IPv6 systems might not support the DHCv6 client function.
•
Auto Config
. This is the default setting.
This setting specifies how the router assigns IPv6 addresses to the devices on your home
network (the LAN).
9.
(Optional) Select the
Use This Interface ID
check box and specify the interface ID to be
used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
10.
Click the
Apply
button.
Your settings are saved.
Set Up an IPv6 6rd Tunnel Internet Connection
6rd protocol makes it possible to deploy IPv6 to sites using a service provider's IPv4 network.
6rd uses the service provider’s own IPv6 address prefix. This limits the operational domain of
6rd to the service provider’s network and is under direct control of the service provider. The
IPv6 service provided is equivalent to native IPv6.
The 6rd mechanism relies upon an algorithmic mapping between the IPv6 and IPv4
addresses that are assigned for use within the service provider’s network. This mapping
allows for automatic determination of IPv4 tunnel endpoints from IPv6 prefixes, allowing
stateless operation of 6rd.
With a 6rd Tunnel configuration, the router follows the RFC5969 standard, supporting two
ways to establish a 6rd tunnel IPv6 WAN connection.
•
Auto Mode
. In IPv6 Auto Detect mode, when the router receives option 212 from the
DHCPv4 option, auto detect selects the IPv6 as 6rd Tunnel setting. The router uses the
6rd option information to establish the 6rd connection.
•
Manual Mode
. Select 6rd Tunnel. If the router receives option 212, the fields are
automatically completed. Otherwise, you must enter the 6rd settings.
To set up an IPv6 6rd Tunnel Internet Connection:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type
or
.
Page 30 / 154
Specify Your Internet Settings
30
N750 WiFi Router
A login screen displays.
3.
Enter the router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED > Advanced Setup > IPv6
.
The IPv6 screen displays.
5.
In the
Internet Connection Type
list, select
6rd Tunnel
.
The router detects the service provider’s IPv4 network and attempts to establish an IPv6
6rd Tunnel connection. If the IPv4 network returns 6rd parameters to the router the
screen adjusts to display the correct settings in the 6rd Configuration section.
6.
If necessary, manually change the fields in the 6rd Configuration section.
7.
Click the
Apply
button.
Your settings are saved.
Set Up an IPv6 6to4 Tunnel Internet Connection
The remote relay router is the router to which your router creates a 6to4 tunnel. Make sure
that the IPv4 Internet connection is working before you apply the 6to4 tunnel settings for the
IPv6 connection.
To set up an IPv6 Internet connection by using a 6to4 tunnel:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type
or
.
A login screen displays.
3.
Enter the router user name and password.

Rate

3.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top