NETGEAR genie Basic Settings

21

N600 Wireless Dual Band Gigabit Router WNDR3700v4

Basic Home Screen

The genie Basic Home screen is shown in the following figure:

Internet Setup

The Internet Setup screen is where you view or change basic ISP information.

You can use the Setup Wizard to detect the Internet connection and automatically set up the

router. See

Setup Wizard

on page

39.



To view or change the basic Internet setup:

1.

From the Home screen, select

Internet

. The following screen displays:

Scroll to

view more

settings

The fields that display in the Internet Setup screen depend on whether your Internet

connection requires a login.

NETGEAR genie Basic Settings

22

N600 Wireless Dual Band Gigabit Router WNDR3700v4

•

Yes

. Select the encapsulation method and enter the login name. If you want to

change the login time-out, enter a new value in minutes.

•

No

. Enter the account and domain names, only if needed.

2.

Enter the settings for the IP address and DNS server. The default settings usually work fine.

If you have problems with your connection, check to make sure that the settings in this

screen match the information from your ISP.

3.

Click

Apply

to save your settings.

4.

Click

Test

to test your Internet connection. If the NETGEAR website does not display within

1 minute, see

Chapter 9, Troubleshooting

.

Internet Setup Screen Fields

The following descriptions explain all of the possible fields in the Internet Setup screen. The

fields that display in this screen depend on whether tan ISP login is required.

Does Your ISP Require a Login?

Answer either yes or no.

These fields display when no login is required:

•

Account Name (if required)

. Enter the account name that your ISP provided. This might

also be called the host name.

•

Domain Name (if required)

. Enter the domain name that your ISP provided.

These fields display when your ISP requires a login:

•

Internet Service Provider Encapsulation

. ISP types. The choices are PPPoE, PPTP, or

L2TP. If you are not sure, check with your ISP.

•

Login

. The login name that your ISP provided. This login name is often an email address.

•

Password

. The password that you use to log in to your ISP.

•

Idle Timeout (In minutes)

. If you want to change the login time-out, enter a new value in

minutes. This setting determines how long the router keeps the Internet connection active

after there is no Internet activity from the LAN. A value of 0 (zero) means never log out.

Internet IP Address

.

•

Get Dynamically from ISP

. Your ISP uses DHCP to assign your IP address. Your ISP

automatically assigns these addresses.

•

Use Static IP Address

. Enter the IP address, IP subnet mask, and the gateway IP

address that your ISP assigned. The gateway is the ISP router to which your router will

connect.

Domain Name Server (DNS) Address

. The DNS server is used to look up site addresses

based on their names.

•

Get Automatically from ISP

. Your ISP uses DHCP to assign your DNS servers. Your ISP

automatically assigns this address.

NETGEAR genie Basic Settings

23

N600 Wireless Dual Band Gigabit Router WNDR3700v4

•

Use These DNS Servers

. If you know that your ISP requires specific servers, select this

option. Enter the IP address of your ISP’s primary DNS server. If a secondary DNS server

address is available, enter it also.

Router MAC Address

. The Ethernet MAC address that the router uses on the Internet port.

Some ISPs register the MAC address of the network interface card in your computer when

your account is first opened. They accept traffic only from the MAC address of that computer.

This feature allows your router to use your computer’s MAC address (this is also called

cloning).

•

Use Default Address

. Use the default MAC address.

•

Use Computer MAC Address

. The router captures and uses the MAC address of the

computer that you are now using. You have to use the one computer that the ISP allows.

•

Use This MAC Address

. Enter the MAC address that you want to use.

Attached Devices

The Attached Device screen shows all computers or devices that are currently connected to

your network.



To go to the Attached Devices screen:

From the Basic Home screen, select

Attached Devices

.

Wired devices are connected to the router with Ethernet cables. Wireless devices have

joined the wireless network.

•

#

(number). The order in which the device joined the network.

•

IP Address

. The IP address that the router assigned to this device when it joined the

network. This number can change if a device is disconnected and rejoins the network.

•

MAC Address

. The unique MAC address for each device does not change. The MAC

address is typically shown on the product label.

•

Device Name

. If the device name is known, it is shown here.

You can click

Refresh

to update this screen.

NETGEAR genie Basic Settings

24

N600 Wireless Dual Band Gigabit Router WNDR3700v4

Parental Controls

The first time you select Parental Controls from the Basic Home screen, your browser goes to

the Parental Controls website. You can learn more about Live Parental Controls or download

the application.



To set up Live Parental Controls:

1.

Select

Parental Controls

on the Home (dashboard) screen.

Live Parental Controls uses free OpenDNS accounts. If you do not have one, you can

create one now.

2.

Log in to manage Parental Control settings.

3.

Click either the

Windows Users

or

Mac Users

button.

4.

Follow the onscreen instructions to download and install the NETGEAR Live Parental

Controls Management utility.

NETGEAR genie Basic Settings

25

N600 Wireless Dual Band Gigabit Router WNDR3700v4

After installation, Live Parental Controls automatically starts.

5.

Click

Next

, read the note, and click

Next

again to proceed.

You are prompted to log in or create a free account.

6.

Select the radio button that applies to you and click

Next

.

•

If you already have an OpenDNS account, leave the

Yes

radio button selected.

•

If you do not have an OpenDNS account, select the

No

radio button.

After you log on or create your account, the filtering level screen displays: