1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. WNDR3400v3
    5. /
  5. 15
Page 71 / 149 Scroll up to view Page 66 - 70
N600 Wireless Dual Band Router WNDR3400 User Manual
Using Network Monitoring Tools
4-16
v1.0, August 2010
Traffic Meter
Traffic Metering allows you to monitor the volume of Internet traffic passing through your router’s
Internet port. With the Traffic Meter utility, you can set limits for traffic volume, set a monthly
limit, and get a live update of traffic usage.
To monitor traffic on your router, do the following:
1.
On the Advanced menu, click
Traffic Meter
.
2.
To enable the Traffic Meter, click the
Enable Traffic Meter
check box.
Figure 4-12
Downloaded from
www.Manualslib.com
manuals search engine
Page 72 / 149
N600 Wireless Dual Band Router WNDR3400 User Manual
Using Network Monitoring Tools
4-17
v1.0, August 2010
3.
If you would like to record and restrict the volume of Internet traffic, click the
Traffic volume
control
by
radio button. You can select one of the following options for controlling the traffic
volume:
•
No Limit – No restriction is applied when the traffic limit is reached.
•
Download only – The restriction is applied to incoming traffic only.
•
Both Directions – The restriction is applied to both incoming and outgoing traffic.
4.
You can limit the amount of data traffic allowed per month:
•
By specifying how many Mbytes per month are allowed.
•
By specifying how many hours of traffic are allowed.
5.
Set the
Traffic Counter
to begin at a specific time and date.
6.
Set up
Traffic Control
to issue a warning message before the month limit of Mbytes or Hours
is reached. You can select one of the following to occur when the limit is attained:
•
The Internet LED flashes green or amber.
•
The Internet connection is disconnected and disabled.
7.
Set up
Internet Traffic Statistics
to monitor the data traffic.
8.
Click the
Traffic Status
button if you want a live update on Internet traffic status on your
router.
9.
Click
Apply
to save your settings.
Downloaded from
www.Manualslib.com
manuals search engine
Page 73 / 149
N600 Wireless Dual Band Router WNDR3400 User Manual
Customizing Your Network Settings
5-1
v1.0, August 2010
Chapter 5
Customizing Your Network Settings
This chapter describes advanced features of the N600 Wireless Dual Band Router WNDR3400.
This chapter includes the following sections:
•
“Using the LAN Setup Options
”
•
“Using a Dynamic DNS Service” on page 5-5
•
“Configuring the WAN Setup Options” on page 5-7
•
“Configuring Static Routes” on page 5-9
•
“Allowing Inbound Connections to Your Network” on page 5-11
•
“Configuring Port Forwarding to Local Servers” on page 5-16
•
“Configuring Port Triggering” on page 5-18
•
“Wireless Repeating (Also Called WDS)” on page 5-22
Using the LAN Setup Options
The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host
Configuration Protocol (DHCP) and Routing Information Protocol (RIP).
The router is shipped preconfigured to use private IP addresses on the LAN side and to act as a
DHCP server. The router’s default LAN IP configuration is:
•
LAN IP address:
192.168.1.1
•
Subnet mask:
255.255.255.0
These addresses are part of the designated private address range for use in private networks and
should be suitable for most applications. If your network has a requirement to use a different IP
addressing scheme, you can make those changes in the LAN Setup screen.
Downloaded from
www.Manualslib.com
manuals search engine
Page 74 / 149
N600 Wireless Dual Band Router WNDR3400 User Manual
Customizing Your Network Settings
5-2
v1.0, August 2010
To configure LAN IP settings, log in to the router, and under the Advanced heading, select
LAN
Setup
. The following screen displays:
If you make changes you must click
Apply
in order for the changes to take effect.
The LAN Setup fields are explained in the following table.
Figure 5-1
Note:
If you change the LAN IP address of the router while connected through the
browser, you will be disconnected. You must then open a new connection to the
new IP address and log in again.
Table 5-1.
LAN Setup
Settings
Description
Device Name
A descriptive name for the router, which will be shown in the
Network on Windows Vista and the Network Explorer on all
Windows systems. The
Device Name
field cannot be blank.
Downloaded from
www.Manualslib.com
manuals search engine
Page 75 / 149
N600 Wireless Dual Band Router WNDR3400 User Manual
Customizing Your Network Settings
5-3
v1.0, August 2010
LAN TCP/IP
Setup
IP Address
The LAN IP address of the wireless router.
IP Subnet Mask
The LAN subnet mask of the wireless router. Combined
with the IP address, the IP Subnet Mask allows a device to
know which other addresses are local to it, and which must
be reached through a gateway or wireless router.
RIP Direction
RIP (Router Information Protocol) allows a wireless router
to exchange routing information with other routers. This
setting controls how the wireless router sends and receives
RIP packets.
Both
is the default.
•
Both
or
Out Only
. The wireless router broadcasts its
routing table periodically.
•
Both
or
In Only
. The wireless router incorporates the RIP
information that it receives.
RIP Version
This controls the format and the broadcasting method of the
RIP packets that the wireless router sends. It recognizes
both formats when receiving. By default, the RIP function is
disabled.
•
RIP-1 is universally supported. It is adequate for most
networks, unless you have an unusual network setup.
•
RIP-2 carries more information. Both RIP-2B and RIP-2M
send the routing data in RIP-2 format. RIP-2B uses
subnet broadcasting. RIP-2M uses multicasting.
DHCP Server
For more
information
Use Router as a DHCP
Server
This check box is usually selected so that the wireless
router functions as a Dynamic Host Configuration Protocol
(DHCP) server. See
“Using the Router as a DHCP Server”
on page 5-4
.
Starting IP Address
Specify the start of the range for the pool of IP addresses in
the same subnet as the wireless router.
Ending IP Address
Specify the end of the range for the pool of IP addresses in
the same subnet as the wireless router.
Address Reservation
For more information, see
“Address
Reservation” on page 5-4
.
When you specify a reserved IP address for a computer on
the LAN, that computer receives the same IP address each
time it access the router’s DHCP server. Assign reserved IP
addresses to servers that require permanent IP settings.
Table 5-1.
LAN Setup
Settings
Description
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4 / 5 based on 1 vote.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top