1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. WNDR3400
    5. /
  5. 9
Page 41 / 48 Scroll up to view Page 36 - 40
N600 Wireless Dual Band Router WNDR3400 Setup Manual
Troubleshooting
38
•
Check that your PC has the IP address of your router listed as the default gateway. If the IP
configuration of your PC is assigned by DHCP, this information is not visible in your PC’s
Network Control Panel. Verify that the IP address of the router is listed as the TCP/IP default
gateway.
•
Check to see that the network address of your PC (the portion of the IP address specified by
the netmask) is different from the network address of the remote device.
•
If your ISP assigned a host name to your PC, enter that host name as the account name in the
Basic Settings screen.
Page 42 / 48
Technical Specifications
39
Technical Specifications
Default Configuration Settings
This section provides factory default settings and technical specifications for the N600 Wireless
Dual Band Router WNDR3400.
Table 3.
Wireless Router Default Configuration Settings
Feature
Default Setting
Smart Wizard
Enabled
Router Login
Router Login URL
http://www. routerlogin.net
or
http://www
.
routerlogin.com
Login name (case-sensitive) printed on
product label
admin
Login password (case-sensitive) printed
on product label
password
Internet Connection
WAN MAC address
Use default hardware address
MTU Size
1500
Local Network
Router LAN IP address printed on
product label (also known as modem IP
address)
192.168.1.1
Router Subnet
255.255.255.0
DHCP Server
Enabled
Time Zone
Pacific Time
Time Zone Adjusted for Daylight Saving
Time
Disabled
Page 43 / 48
N600 Wireless Dual Band Router WNDR3400 Setup Manual
Technical Specifications
40
Firewall
Inbound (communications coming in from
the Internet)
Disabled (bars all unsolicited requests)
Outbound (communications going out to
the Internet)
Enabled (all)
Wireless
Wireless Communication
Enabled
Name (2.4GHz g/b/n SSID)
NETGEAR
Name (5GHz a/n SSID)
NETGEAR-5G
Security
Disabled
Broadcast SSID
Enabled
Country/Region
United States in the US, otherwise varies by region
11N 5GHz Channel
36/5.180GHz
11N 2.4GHz Channel
Auto
a
Operating Mode
Up to 300 Mbps at 5GHz and 145 Mbps at 2.4GHz
Output Power
Full
a. Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will
vary. Network conditions and environmental factors, including volume of network traffic, building
materials and construction, and network overhead lower actual data throughput rate.
Network Protocol and Standards Compatibility
Data and Routing Protocols:
TCP/IP, RIP-1, RIP-2, DHCP
PPP over Ethernet (PPPoE)
Power Adapter
North America
120V, 60 Hz, input
United Kingdom, Australia
240V, 50 Hz, input
Europe
230V, 50 Hz, input
Japan
100V, 50/60 Hz, input
All regions (output)
12 V DC @ 1.5A output, 18W maximum
Table 3.
Wireless Router Default Configuration Settings (continued)
Feature
Default Setting
Page 44 / 48
N600 Wireless Dual Band Router WNDR3400 Setup Manual
Technical Specifications
41
Physical Specifications
Dimensions
28 x 175 x 119 mm
(1.1 x 6.89 x 4.68 in.)
Weight
0.5 kg
(1.2 lb)
Environmental Specifications
Operating temperature
0
to 40
C
(32º to 104º F)
Operating humidity
90% maximum relative humidity, noncondensing
Electromagnetic Emissions
Meets requirements of:
FCC Part 15 Class B
VCCI Class B
EN 55 022 (CISPR 22), Class B
C-Tick N10947
Interface Specifications
LAN
10BASE-T or 100BASE-Tx, RJ-45
WAN
10BASE-T or 100BASE-Tx, RJ-45
Wireless
Maximum wireless signal rate complies with the IEEE
802.11 standard. Actual throughput will vary. Network
conditions and environmental factors, including
volume of network traffic, building materials and
construction, and network overhead, lower actual
data throughput rate.
Radio Data Rates
Auto Rate Sensing
Frequency
2.4 GHz & 5 GHz
Data Encoding
Standards
IEEE 802.11n, IEEE 802.11g, IEEE 802.11b 2.4 GHz
IEEE 802.11n, IEEE 802.11g 5.0 GHz
Maximum Computers Per Wireless
Network
Limited by the amount of wireless network traffic
generated by each node. Typically 30-70 nodes.
Operating Frequency Ranges (2.4G)
2.412–2.462 GHz (US)
2.412–2.472 GHz (Japan)
2.412–2.472 GHz (Europe ETSI)
Table 3.
Wireless Router Default Configuration Settings (continued)
Feature
Default Setting
Page 45 / 48
N600 Wireless Dual Band Router WNDR3400 Setup Manual
Technical Specifications
42
Restoring the Default Password and Configuration
Settings
You can restore the factory default configuration settings that reset the router’s user name to
admin,
the password to
password,
and the IP address to
192.168.1.1
.
To restore the factory default configuration settings:
1.
Use a sharp object such as a pen or a paper clip to press and hold the restore factory settings
button, located on the rear panel of the router, for about 5 seconds, until the Power light begins
to blink (see
“Back Panel” on page 5
).
2.
Release the restore factory settings button, and wait for the router to restart, and for the Power
light to stop blinking and become solid green.
The factory default settings will be restored so that you can access the router from your Web
browser using the factory defaults.
Operating Frequency Ranges (5G)
5.18–5.24 + 5.745–5.825 GHz (US)
5.18–5.24 GHz (Europe ETSI)
802.11 Security
40-bit (also called 64-bit) and 128-bit WEP, WPA-
PSK and WPA2-PSK.
This procedure will erase all the current configuration settings and restore the
factory defaults.
Table 3.
Wireless Router Default Configuration Settings (continued)
Feature
Default Setting

Rate

4 / 5 based on 1 vote.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top