Page 116 / 152 Scroll up to view Page 111 - 115
Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v2
C-10
Preparing Your Network
M-10153-01
DHCP Configuration of TCP/IP in Windows 2000
Once again, after you have installed the network card, TCP/IP for Windows 2000 is configured.
TCP/IP should be added by default and set to DHCP without your having to configure it.
However, if there are problems, follow these steps to configure TCP/IP with DHCP for Windows
2000.
• Verify that the
Obtain an IP address
automatically
radio button is selected.
• Verify that
Obtain DNS server address
automatically
radio button is selected.
• Click the
OK
button.
This completes the DHCP configuration of TCP/
IP in Windows XP.
Repeat these steps for each PC with this version
of Windows on your network.
Page 117 / 152
Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v2
Preparing Your Network
C-11
M-10153-01
• Click on the
My Network Places
icon on the Windows desktop. This will bring up a window
called Network and Dial-up Connections.
• Right click on
Local Area Connection
and select
Properties
.
• The
Local Area Connection Properties
dialog box appears.
• Verify that you have the correct Ethernet
card selected in the
Connect using:
box.
• Verify that at least the following two items
are displayed and selected in the box of
“Components checked are used by this
connection:”
Client for Microsoft Networks and
Internet Protocol (TCP/IP)
• Click
OK
.
Page 118 / 152
Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v2
C-12
Preparing Your Network
M-10153-01
• With Internet Protocol (TCP/IP) selected,
click on
Properties
to open the Internet
Protocol (TCP/IP) Properties dialogue box.
• Verify that
Obtain an IP address automatically
is
selected.
Obtain DNS server address
automatically
is selected.
• Click
OK
to return to Local Area
Connection Properties.
• Click
OK
again to complete the
configuration process for Windows 2000.
Restart the PC.
Repeat these steps for each PC with this version
of Windows on your network.
Page 119 / 152
Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v2
Preparing Your Network
C-13
M-10153-01
DHCP Configuration of TCP/IP in Windows NT4
Once you have installed the network card, you need to configure the TCP/IP environment for
Windows NT 4.0. Follow this procedure to configure TCP/IP with DHCP in Windows NT 4.0.
• Choose
Settings
from the Start Menu, and then select
Control Panel
.
This will display Control Panel window.
• Double-click the
Network
icon in the
Control Panel window.
The Network panel will display.
• Select the
Protocols
tab to continue.
Page 120 / 152
Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v2
C-14
Preparing Your Network
M-10153-01
• Highlight the
TCP/IP Protocol
in the
Network Protocols
box, and click on the
Properties
button.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top