19216811.livePrint Using the NETGEAR USB Control Center
For each computer, after you click the
Connect
and
Disconnect
buttons once, the utility automatically manages
the printing queue and handling. By default, the utility starts automatically whenever you log on to Windows and
runs in the background.
To print a document using the NETGEAR USB Control Center:
1.
Click the
NETGEAR USB Control Center
icon
.
The NETGEAR USB Control Center page displays.
2.
Select a printer and click the
Connect
button.
The printer status changes to Manually connected by
Mycomputer
. Now only the computer you are using can
use this printer.
3.
Use the print feature in your application to print your document.
The NETGEAR USB Control Center automatically connects your computer to the USB printer and prints the
document. If another computer is already connected to the printer, your print job goes into a queue to wait to
be printed.
4.
If your document does not print, use the NETGEAR USB Control Center to check the printer status.
5.
To release the printer so that all computers on the network can use it, click the
Disconnect
button.
The status changes to Available. Now any computers on the network can use the printer.
6.
To exit the utility, select
System > Exit
.
View or Change the Status of a Printer
To view or change the status:
1.
Click the
NETGEAR USB Control Center
icon
.
The NETGEAR USB Control Center page displays.
The Status column shows the status for each device:
•
Available
. No print jobs are in progress.You can use the USB printer from any computer in the network.
•
Connected
.Your computer is connected to the printer and will be released when your print job is done.
•
Manually Connected by
. Only the connected computer can use the printer.
•
Waiting to Connect
.Your computer is not connected to the shared printer yet.
2.
To print from your computer when the status shows Manually connected by
another computer
, do the following:
Share a USB Printer
126
Nighthawk X4S AC2600 Smart WiFi Router