1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. R6200v2
    5. /
  5. 22
Page 106 / 131 Scroll up to view Page 101 - 105
Advanced Settings
106
R6200v2 Smart WiFi Router
•
If you are not sure, select
Auto Detect
so that the router detects the IPv6 type that is
in use.
•
If your Internet connection does not use PPPoE, DHCP, or fixed, but is IPv6, select
Auto Config
.
For more information about Internet connection types, see the following sections.
3.
Click the
Apply
button.
Your changes take effect.
Requirements for Entering IPv6 Addresses
IPv6 addresses are denoted by eight groups of hexadecimal quartets that are separated by
colons. Any four-digit group of zeroes within an IPv6 address can be reduced to a single zero
or altogether omitted.
The following errors invalidate an IPv6 address:
•
More than eight groups of hexadecimal quartets
•
More than four hexadecimal characters in a quartet
•
More than two colons in a row
Auto Detect
To set up an IPv6 Internet connection through auto detection:
1.
Select
ADVANCED > Advanced Setup > IPv6
.
The IPv6 screen displays.
2.
In the Internet Connection Type list, select
Auto Detect
.
The screen adjusts:
The router automatically detects the information in the following fields:
•
Connection Type
. This field indicates the connection type that is detected.
Page 107 / 131
Advanced Settings
107
R6200v2 Smart WiFi Router
•
Router’s IPv6 Address on WAN
. This field shows the IPv6 address that is acquired
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length
of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
•
Router’s IPv6 Address on LAN
. This field shows the IPv6 address that is acquired
for the router’s LAN interface. The number after the slash (/) is the length of the prefix,
which is also indicated by the underline (_) under the IPv6 address. If no address is
acquired, the field displays Not Available.
3.
Specify how the router assigns IPv6 addresses to the devices on your home network (the
LAN) by selecting one of the following radio buttons:
•
Use DHCP Server
. This method passes more information to LAN devices, but some
IPv6 systems might not support the DHCv6 client function.
•
Auto Config
. This is the default setting.
4.
(Optional) Select the
Use This Interface ID
check box, and specify the interface ID that you
want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
5.
Click the
Apply
button.
IPv6 Auto Config
To set up an IPv6 Internet connection through auto configuration:
1.
Select
ADVANCED > Advanced Setup > IPv6
.
The IPv6 screen displays.
2.
In the Internet Connection Type list, select
Auto Config
.
The screen adjusts:
The router automatically detects the information in the following fields:
Page 108 / 131
Advanced Settings
108
R6200v2 Smart WiFi Router
•
Router’s IPv6 Address on WAN
. This field shows the IPv6 address that is acquired
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length
of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
•
Router’s IPv6 Address on LAN
. This field shows the IPv6 address that is acquired
for the router’s LAN interface. The number after the slash (/) is the length of the prefix,
which is also indicated by the underline (_) under the IPv6 address. If no address is
acquired, the field displays Not Available.
3.
(Optional) In the DHCP User Class (If Required) field, enter a host name.
Most people do not need to fill in this field, but if your ISP has given you a specific host
name, enter it here.
4.
(Optional) In the Domain Name (If Required) field, enter a domain name.
You can type the domain name of your IPv6 ISP. (Do not enter the domain name for the
IPv4 ISP here.) For example, if your ISP’s mail server is mail.xxx.yyy.zzz, you would type
xxx.yyy.zzz as the domain name. If your ISP provided a domain name, type it in this field.
(For example, Earthlink Cable might require a host name of home, and Comcast
sometimes supplies a domain name.)
5.
Specify how the router assigns IPv6 addresses to the devices on your home network (the
LAN) by selecting one of the following radio buttons:
•
Use DHCP Server
. This method passes more information to LAN devices, but some
IPv6 systems might not support the DHCv6 client function.
•
Auto Config
. This is the default setting.
6.
(Optional) Select the
Use This Interface ID
check box, and specify the interface ID that you
want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
7.
Click the
Apply
button.
IPv6 6to4 Tunnel
The remote relay router is the router to which your router creates the 6to4 tunnel. Make sure
that the IPv4 Internet connection is working before you apply the 6to4 tunnel settings for the
IPv6 connection.
To set up an IPv6 Internet connection by using a 6to4 tunnel:
1.
Select
ADVANCED > Advanced Setup > IPv6
.
The IPv6 screen displays.
2.
In the Internet Connection Type list, select
6to4 Tunnel
.
Page 109 / 131
Advanced Settings
109
R6200v2 Smart WiFi Router
The screen adjusts:
The router automatically detects the information in the following fields:
•
Router’s IPv6 Address on WAN
. This field shows the IPv6 address that is acquired
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length
of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
•
Router’s IPv6 Address on LAN
. This field shows the IPv6 address that is acquired
for the router’s LAN interface. The number after the slash (/) is the length of the prefix,
which is also indicated by the underline (_) under the IPv6 address. If no address is
acquired, the field displays Not Available.
3.
Configure the remote 6to4 relay router settings by selecting one of the following buttons:
•
Auto
. Your router uses any remote relay router that is available on the Internet. This
is the default setting.
•
Static IP Address
. Enter the static IPv4 address of the remote relay router. This
address is usually provided by your IPv6 ISP.
4.
Specify how the router assigns IPv6 addresses to the devices on your home network (the
LAN) by selecting one of the following radio buttons:
•
Use DHCP Server
. This method passes more information to LAN devices, but some
IPv6 systems might not support the DHCv6 client function.
•
Auto Config
. This is the default setting.
5.
(Optional) Select the
Use This Interface ID
check box, and specify the interface ID that you
want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
6.
Click the
Apply
button.
IPv6 Pass Through
In pass-through mode, the router works as a Layer 2 Ethernet switch with two ports (LAN and
WAN Ethernet ports) for IPv6 packets. The router does not process any IPv6 header packets.
Page 110 / 131
Advanced Settings
110
R6200v2 Smart WiFi Router
To set up a pass-through IPv6 Internet connection:
1.
Select
ADVANCED > Advanced Setup > IPv6
.
The IPv6 screen displays.
2.
In the Internet Connection Type list, select
Pass Through
.
The screen adjusts, but no additional fields display.
3.
Click the
Apply
button.
IPv6 Fixed
To set up a fixed IPv6 Internet connection:
1.
Select
ADVANCED > Advanced Setup > IPv6
.
The IPv6 screen displays.
2.
Select
Fixed
from the menu.
The screen adjusts:
3.
Configure the fixed IPv6 addresses for the WAN connection:
•
IPv6 Address/Prefix Length
. The IPv6 address and prefix length of the router WAN
interface.
•
Default IPv6 Gateway
. The IPv6 address of the default IPv6 gateway for the router’s
WAN interface.
•
Primary DNS Server
. The primary DNS server that resolves IPv6 domain name
records for the router.
•
Secondary DNS Server
. The secondary DNS server that resolves IPv6 domain
name records for the router.

Rate

4.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top