1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. R6200
    5. /
  5. 10
Page 46 / 130 Scroll up to view Page 41 - 45
Genie Advanced Home
46
Dual Band 11ac WiFi Router R6200
a.
If you add an entry, the Priority Rules screen expands as shown:
b.
In the QoS Policy for field, enter a descriptive name for the new application or game.
c.
In the Connection Type list, select either
TCP,
UDP,
or both (
TCP/UDP
). Specify the
port number or range of port numbers that the application or game uses.
7.
From the Priority list, select the priority for Internet access for this traffic relative to other
applications and traffic. The options are Low, Normal, High, and Highest.
8.
Click
Apply
to save this rule to the QoS Policy list and return to the QoS Setup screen.
QoS for a Router LAN Port
To create a QoS policy for a device connected to one of the router’s LAN ports:
1.
Select
Advanced > Setup > QoS Setup
to display the QoS Setup screen. Select the
Turn Internet Access QoS On
check box.
2.
Click the
Setup QoS Rule
button.
3.
Click the
Add Priority Rule
button.
Page 47 / 130
Genie Advanced Home
47
Dual Band 11ac WiFi Router R6200
4.
From the Priority Category list, select
Ethernet LAN Port
, as shown in the following figure:
5.
From the LAN port list, select the LAN port.
6.
From the Priority list, select the priority for Internet access for this port’s traffic relative to
other applications. The options are Low, Normal, High, and Highest.
7.
Click
Apply
to save this rule to the QoS Policy list and return to the QoS Setup screen.
8.
In the QoS Setup screen, click
Apply
.
QoS for a MAC Address
To create a QoS policy for traffic from a specific MAC address:
1.
Select
Advanced > Setup > QoS Setup.
2.
Click the
Setup QoS Rule
button. The QoS Setup screen displays.
3.
Click
Add Priority Rule
.
Page 48 / 130
Genie Advanced Home
48
Dual Band 11ac WiFi Router R6200
4.
From the Priority Category list, select
MAC Address
to display the following screen:
5.
If the device to be prioritized appears in the MAC Device List, select its radio button. The
information from the MAC Device List populates the policy name, MAC Address, and Device
Name fields. If the device does not appear in the MAC Device List, click
Refresh
. If it still
does not appear, then fill in these fields manually.
6.
From the Priority list, select the priority for Internet access for this device’s traffic relative to
other applications and traffic. The options are Low, Normal, High, and Highest.
7.
Click
Apply
to save this rule to the QoS Policy list and return to the QoS Setup screen.
8.
In the QoS Setup screen, select the
Turn Internet Access QoS On
check box.
9.
Click
Apply
.
Edit or Delete an Existing QoS Policy
To edit or delete a QoS policy:
1.
Select
Advanced > QoS Setup
to display the QoS Setup screen.
2.
Select the radio button next to the QoS policy that you want to edit or delete, and do one of
the following:
•
Click
Delete
to remove the QoS policy.
•
Click
Edit
to edit the QoS policy. Follow the instructions in the preceding sections to
change the policy settings.
3.
Click
Apply
in the QoS Setup screen to save your changes.
Page 49 / 130
49
5
5.
USB Storage
Accessing and configuring a USB storage
drive
This chapter describes how to access and configure a USB storage drive attached to your
router. The USB port on the router can be used only to connect USB storage devices like flash
drives or hard drives, or a printer. Do not connect computers, USB modems, CD drives, or DVD
drives to the router USB port.
This chapter contains the following sections:
•
USB Drive Requirements
•
ReadySHARE Access
•
File-sharing Scenarios
•
Basic Settings
•
USB Storage Advanced Settings
•
Safely Remove a USB Drive
•
Media Server Settings
•
Specify Approved USB Devices
For information about using the ReadySHARE Printer feature, see
Chapter 6, ReadySHARE
Printer
.
For additional about ReadySHARE features, see
www.netgear.com/readyshare
.
Page 50 / 130
USB Storage
50
Dual Band 11ac WiFi Router R6200
USB Drive Requirements
The router works with 1.0 and 1.1 (USB Full Speed) and 2.0 (USB High Speed) standards.
The approximate USB bus speeds are shown in the following table. Actual bus speeds can
vary, depending on the CPU speed, memory, speed of the network, and other variables.
Table 3.
USB Drive Speeds
Bus
Speed/Sec
USB 1.1
12 Mbits
USB 2.0
480 Mbits
The router works with most USB-compliant external flash and hard drives. For the most
up-to-date list of USB drives that the router supports, go to:
The router supports both read and write for FAT16, FAT32, NTFS, and Linux file systems
(EXT2 and EXT3).
Note:
Some USB external hard drives and flash drives require you to load
the drivers onto the computer before the computer can access the
USB device. Such USB devices do not work with the router.
ReadySHARE Access
Once you have set up your router, you can connect any USB storage device and share the
contents with others on your network.
You can access your USB device in any of the following ways:
•
On Windows 7, Windows XP, Windows Vista, and Windows 2000 systems, select
Start >
Run
, and enter
\\readyshare
in the dialog box. Click
OK
.
•
On Windows 7, Windows XP, Windows Vista, and Windows 2000 systems, open Internet
Explorer or Safari and enter
\\readyshare
in the address bar.
•
On Mac OSX (version 10.2 or later), enter
smb://readyshare
in the address bar.
•
In My Network Places, enter
\\readyshare
in the address bar.
File-sharing Scenarios
You can share files on the USB drive for a wide variety of business and recreational
purposes. The files can be any PC, Mac, or Linux file type including text files, Word,
PowerPoint, Excel, MP3, pictures, and multimedia. USB drive applications include:

Rate

4.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top