Page 101 / 122 Scroll up to view Page 96 - 100
Advanced Settings
101
R6100 WiFi Router
IPv6 DHCP
To set up an IPv6 Internet connection with a DHCP server:
1.
Select
ADVANCED > Advanced Setup > IPv6
.
The IPv6 screen displays.
2.
In the Internet Connection Type list, select
DHCP
.
The screen adjusts:
The router automatically detects the information in the following fields:
Router’s IPv6 Address on WAN
. This field shows the IPv6 address that is acquired
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length
of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
Router’s IPv6 Address on LAN
. This field shows the IPv6 address that is acquired
for the router’s LAN interface. The number after the slash (/) is the length of the prefix,
which is also indicated by the underline (_) under the IPv6 address. If no address is
acquired, the field displays Not Available.
3.
(Optional) In the DHCP User Class (If Required) field, enter a host name.
Most people do not need to fill in this field, but if your ISP has given you a specific host
name, enter it here.
4.
(Optional) In the Domain Name (If Required) field, enter a domain name.
You can type the domain name of your IPv6 ISP. (Do not enter the domain name for the
IPv4 ISP here.) For example, if your ISP’s mail server is mail.xxx.yyy.zzz, you would type
xxx.yyy.zzz as the domain name. If your ISP provided a domain name, type it in this field.
(For example, Earthlink cable might require a host name of home, and Comcast
sometimes supplies a domain name.)
5.
Specify how the router assigns IPv6 addresses to the devices on your home network (the
LAN) by selecting one of the following radio buttons:
Page 102 / 122
Advanced Settings
102
R6100 WiFi Router
Use DHCP Server
. This method passes more information to LAN devices, but some
IPv6 systems might not support the DHCv6 client function.
Auto Config
. The default setting.
6.
(Optional) Select the
Use This Interface ID
check box, and specify the interface ID that you
want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
7.
Click the
Apply
button.
IPv6 PPPoE
To set up a PPPoE IPv6 Internet connection:
1.
Select
ADVANCED > Advanced Setup > IPv6
.
The IPv6 screen displays.
2.
In the Internet Connection Type list, select
PPPoE
.
The screen adjusts:
The router automatically detects the information in the following fields:
Router’s IPv6 Address on WAN
. This field shows the IPv6 address that is acquired
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length
of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
Router’s IPv6 Address on LAN
. This field shows the IPv6 address that is acquired
for the router’s LAN interface. The number after the slash (/) is the length of the prefix,
which is also indicated by the underline (_) under the IPv6 address. If no address is
acquired, the field displays Not Available.
3.
In the Login fields, enter the login information for the ISP connection.
Page 103 / 122
Advanced Settings
103
R6100 WiFi Router
This is usually the name that you use in your email address. For example, if your main
mail account is [email protected], you would type JerAB in this field. Some ISPs (like
Mindspring, Earthlink, and T-DSL) require that you use your full email address when you
log in. If your ISP requires your full email address, type it in this field.
4.
In the Password field, enter the password for the ISP connection.
5.
In the Service Name name field, enter a service name.
If your ISP did not provide a service name, leave this field blank.
Note:
The default setting of the Connection Mode field is Always on to provide
a steady IPv6 connection. The router never terminates the connection. If the
connection is terminated, for example, when the modem is turned off, the router
attempts to reestablish the connection immediately after the PPPoE
connection becomes available again.
6.
Specify how the router assigns IPv6 addresses to the devices on your home network (the
LAN) by selecting one of the following radio buttons:
Use DHCP Server
. This method passes more information to LAN devices, but some
IPv6 systems might not support the DHCv6 client function.
Auto Config
. The default setting.
7.
(Optional) Select the
Use This Interface ID
check box, and specify the interface ID that you
want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
8.
Click the
Apply
button.
Page 104 / 122
Advanced Settings
104
R6100 WiFi Router
Traffic Meter
Traffic metering allows you to monitor the volume of Internet traffic that passes through the
router Internet port. You can set limits for traffic volume.
To monitor Internet traffic:
1.
Click
ADVANCED > Advanced Setup > Traffic Meter
.
Scroll to view
more settings
2.
Select the
Enable Traffic Meter
check box.
3.
(Optional) Control the volume of Internet traffic.
You can use either the traffic volume control feature or the connection time control feature
to do this.
Select the
Traffic volume control
by
radio button and then select one of the
following options:
-
No Limit
. No restriction is applied when the traffic limit is reached.
-
Download only
. The restriction is applied to incoming traffic only.
-
Both Directions
. The restriction is applied to both incoming and outgoing traffic.
Select the
Connection time control
radio button and enter the allowed hours in the
Monthly limit field.
4.
(Optional) If your ISP charges for extra data volume when you make a new connection,
enter the extra data volume in MB in the Round up data volume for each connection by field.
5.
In the Traffic Counter section, set the traffic counter to begin at a specific time and date.
If you want the traffic counter to start immediately, click the
Restart Counter Now
button.
Page 105 / 122
Advanced Settings
105
R6100 WiFi Router
6.
In the Traffic Control section, specify whether the router should issue a warning message
before the monthly limit of Mbytes or hours is reached.
By default, the value is 0 and no warning message is issued. You can select one of the
following to occur when the limit is attained:
The Internet LED flashes green or amber.
The Internet connection is disconnected and disabled.
7.
Click the
Apply
button.
The Internet Traffic Statistics section helps you to monitor the data traffic.
Click the
Refresh
button to update the Traffic Statistics section.
Click the
Traffic Status
button to display more information about the data traffic on your
router and to change the poll interval.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top