1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. Orbi RBR50
    5. /
  5. 18
Page 86 / 150 Scroll up to view Page 81 - 85
Specify Network Settings
86
Orbi
WiFi System
6.
Use the menus, radio buttons, and check boxes to set up a period during which you want to
turn off the WiFi signal.
7.
Click the
Apply
button.
The Advanced Wireless Settings page displays.
8.
Select the
Turn off wireless signal by schedule
check box to activate the schedule.
9.
Click the
Apply
button.
Your settings are saved.
Set Up a Bridge for a Port Group or VLAN Tag Group
This feature is available only in Singapore.
Some devices, such as an IPTV, cannot function behind the router’s Network Address
Translation (NAT) service or firewall. Based on what your Internet service provider (ISP)
requires, for the device to connect to the ISP’s network directly, you can enable the bridge
between the device and the router’s Internet port or add new VLAN tag groups to the bridge.
Note:
If your ISP provides directions on how to set up a bridge for IPTV and
Internet service, follow those directions.
Set Up a Bridge for a Port Group
If the devices that are connected to the router’s Ethernet LAN port or WiFi network include an
IPTV device, your ISP might require you to set up a bridge for a port group for the router’s
Internet interface.
A bridge with a port group prevents packets that are sent between the IPTV device and the
router’s Internet port from being processed through the router’s Network Address Translation
(NAT) service.
To configure a port group and enable the bridge:
1.
Launch a web browser from a computer or mobile device that is connected to your Orbi
network.
2.
Enter
orbilogin.com
.
A login window opens.
3.
Enter the router admin user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home page displays.
4.
Select
ADVANCED > Advanced Setup > VLAN/Bridge Settings
.
Page 87 / 150
Specify Network Settings
87
Orbi
WiFi System
The VLAN / Bridge Settings page displays.
5.
Select the
Enable VLAN/Bridge Settings
check box.
The page expands.
6.
Select the
By bridge group
radio button.
The section expands.
7.
Select a Wired Ports check box or a Wireless check box:
•
If your device is connected to an Ethernet port on the router, select the Wired Ports
check box that corresponds to the Ethernet port on the router to which the device is
connected.
•
If your device is connected to your router’s WiFi network, select the Wireless check
box that corresponds to the router’s WiFi network to which the device is connected.
Note:
You must select at least one Wired Ports or Wireless check box. You
can select more than one check box.
8.
Click the
Apply
button.
Your settings are saved.
Set Up a Bridge for a VLAN Tag Group
If the devices that are connected to the router’s Ethernet LAN ports or WiFi network include
an IPTV device, your ISP might require you to set up a bridge for a VLAN tag group for the
router’s Internet interface.
If you are subscribed to IPTV service, the router might require VLAN tags to distinguish
between the Internet traffic and the IPTV traffic. A bridge with a VLAN tag group prevents
packets that are sent between the IPTV device and the router’s Internet port from being
processed through the router’s Network Address Translation (NAT) service.
You can add VLAN tag groups to a bridge and assign VLAN IDs and priority values to each
VLAN tag group.
To add a VLAN tag group and enable the bridge:
1.
Launch a web browser from a computer or mobile device that is connected to your Orbi
network.
2.
Enter
orbilogin.com
.
A login window opens.
3.
Enter the router admin user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
Page 88 / 150
Specify Network Settings
88
Orbi
WiFi System
The BASIC Home page displays.
4.
Select
ADVANCED > Advanced Setup > VLAN/Bridge Settings
.
The VLAN / Bridge Settings page displays.
5.
Select the
Enable VLAN/Bridge Group
check box.
The page expands.
6.
Select the
By VLAN tag group
radio button.
The section expands.
7.
Click the
Add
button.
The Add VLAN Rule page displays.
8.
Specify the settings as described in the following table.
Field
Description
Name
Enter a name for the VLAN tag group.
The name can be up to 10 characters.
VLAN ID
Enter a value from 1 to 4094.
Priority
Enter a value from 0 to 7.
Select the check box for a wired LAN port or WiFi port.
If your device is connected to an Ethernet port on the router, select the LAN port check
box that corresponds to the Ethernet port on the router to which the device is
connected. If your device is connected to your router’s WiFi network, select the WiFi
check box that corresponds to the router’s WiFi network to which the device is
connected.
You must select at least one LAN port or WiFi port.You can select more than one port.
9.
Click the
Add
button.
The VLAN tag group is added.
10.
Click the
Apply
button.
Your settings are saved.
Set Up an IPTV Port to Lease an Intranet Port
You can set up the router to create an Internet Protocol television (IPTV) port that can lease
an IP address from your IPTV service provider. Use this feature only if you subscribe to an
IPTV service and your IPTV service requires an intranet address.
Some IPTV ports cannot work behind Network Address Translation (NAT) because the IPTV
port requires an IP address within the Internet service provider’s network (intranet
address).You can set up a bridge connection from the WAN to one of the LAN ports. When
IPTV is connected through WiFi, the home router also must support the bridging of the WAN
Page 89 / 150
Specify Network Settings
89
Orbi
WiFi System
port to the WiFi network name (SSID). The designated LAN port or WiFi name becomes an
IPTV port with direct access to the WAN without going through NAT.
To configure an IPTV port:
1.
Launch a web browser from a computer or mobile device that is connected to your Orbi
network.
2.
Enter
orbilogin.com
.
A login window opens.
3.
Enter the router admin user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home page displays.
4.
Select
ADVANCED > Advanced Setup > VLAN/Bridge Settings
.
The VLAN / Bridge Settings page displays.
5.
Select the
Enable VLAN/Bridge Group
check box.
The page expands.
6.
Select the
By bridge group
radio button.
The section expands.
7.
Select a Wired Ports check box or a Wireless check box:
•
If your device is connected to an Ethernet port on the router, select the Wired Ports
check box that corresponds to the Ethernet port on the router to which the device is
connected.
•
If your device is connected to your router’s WiFi network, select the Wireless check
box that corresponds to the router’s WiFi network to which the device is connected.
Note:
You must select at least one Wired Ports or Wireless check box. You
can select more than one check box.
8.
Click the
Apply
button.
Your settings are saved.
Page 90 / 150
Specify Network Settings
90
Orbi
WiFi System
Enable British Telecom IGMP Proxy Support
You must use this feature only for British Telecom (BT) Internet Protocol television (IPTV)
service. It might also work with TalkTalk IPTV service.
To enable BT IGMP proxy support:
1.
Launch a web browser from a computer or mobile device that is connected to your Orbi
network.
2.
Enter
orbilogin.com
.
A login window opens.
3.
Enter the router admin user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home page displays.
4.
Select
ADVANCED > Setup > WAN Setup
.
The WAN Setup page displays.
5.
Clear the
Disable IGMP Proxying
check box.
6.
Select the
Support British Telecom (BT) IGMP Proxying
check box.
7.
Click the
Apply
button.
Your settings are saved.

Rate

3.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top