Page 71 / 150
Scroll up to view Page 66 - 70
Specify Network Settings
71
Orbi
WiFi System
The BASIC Home page displays.
4.
Select
ADVANCED > Setup > LAN Setup
.
5.
Make sure that the
Use Router as DHCP Server
check box is selected.
6.
Specify the range of IP addresses that the router assigns:
a.
In the
Starting IP Address
field, type the lowest number in the range.
This IP address must be in the same subnet as the router.
b.
In the
Ending IP Address
field, type the number at the end of the range of IP
addresses.
This IP address must be in the same subnet as the router.
7.
Click the
Apply
button.
Your settings are saved.
The router delivers the following parameters to any LAN device that requests DHCP:
•
An IP address from the range that you defined
•
Subnet mask
•
Gateway IP address (the router’s LAN IP address)
•
DNS server IP address (the router’s LAN IP address)
Disable the DHCP Server Feature in the Router
By default, the router acts as a DHCP server. The router assigns IP, DNS server, and default
gateway addresses to all computers connected to the LAN. The assigned default gateway
address is the LAN address of the router.
You can use another device on your network as the DHCP server, or specify the network
settings of all your computers.
Page 72 / 150
Specify Network Settings
72
Orbi
WiFi System
To disable the DHCP server feature in the router:
1.
Launch a web browser from a computer or mobile device that is connected to your Orbi
network.
2.
Enter
orbilogin.com
.
A login window opens.
3.
Enter the router admin user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home page displays.
4.
Select
ADVANCED > Setup > LAN Setup
.
5.
Clear the
Use Router as DHCP Server
check box.
6.
Click the
Apply
button.
7.
(Optional) If this service is disabled and no other DHCP server is on your network, set your
computer IP addresses manually so that they can access the router.
Manage Reserved LAN IP Addresses
When you specify a reserved IP address for a computer on the LAN, that computer always
receives the same IP address each time it accesses the router’s DHCP server. Assign
reserved IP addresses to computers or servers that require permanent IP settings.
Reserve an IP Address
To reserve an IP address:
1.
Launch a web browser from a computer or mobile device that is connected to your Orbi
network.
Page 73 / 150
Specify Network Settings
73
Orbi
WiFi System
2.
Enter
orbilogin.com
.
A login window opens.
3.
Enter the router admin user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home page displays.
4.
Select
ADVANCED > Setup > LAN Setup
.
5.
In the Address Reservation section of the page, click the
Add
button.
6.
In the
IP Address
field, type the IP address to assign to the computer or server.
Choose an IP address from the router’s LAN subnet, such as 192.168.1.x.
7.
Type the MAC address of the computer or server.
Tip:
If the computer is already on your network, you can copy its MAC
address from the Attached Devices page and paste it here.
8.
Click the
Apply
button.
The reserved address is entered into the table.
The reserved address is not assigned until the next time the computer contacts the router’s
DHCP server. Reboot the computer, or access its IP configuration and force a DHCP release
and renew.
Page 74 / 150
Specify Network Settings
74
Orbi
WiFi System
Edit a Reserved IP Address
To edit a reserved address entry:
1.
Launch a web browser from a computer or mobile device that is connected to your Orbi
network.
2.
Enter
orbilogin.com
.
A login window opens.
3.
Enter the router admin user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home page displays.
4.
Select
ADVANCED > Setup > LAN Setup
.
5.
Select the radio button next to the reserved address.
6.
Click the
Edit
button.
The Address Reservation page displays.
7.
Change the settings.
8.
Click the
Apply
button.
Your settings are saved.
Delete a Reserved IP Address Entry
To delete a reserved address entry:
1.
Launch a web browser from a computer or mobile device that is connected to your Orbi
network.
2.
Enter
orbilogin.com
.
Page 75 / 150
Specify Network Settings
75
Orbi
WiFi System
A login window opens.
3.
Enter the router admin user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home page displays.
4.
Select
ADVANCED > Setup > LAN Setup
.
5.
Select the radio button next to the reserved address.
6.
Click the
Delete
button.
The address is removed.
Custom Static Routes
Typically, you do not need to add static routes unless you use multiple routers or multiple IP
subnets on your network.
As an example of when a static route is needed, consider the following case:
•
Your main Internet access is through a cable modem to an ISP.
•
Your home network includes an ISDN router for connecting to the company where you
are employed. This router’s address on your LAN is
192.168.1.100.
•
Your company’s network address is 134.177.0.0.
When you set up your router, two implicit static routes were created. A default route was
created with your ISP as the gateway, and a second static route was created to your local
network for all 192.168.1.x addresses. With this configuration, if you try to access a device on
the 134.177.0.0 network, your router forwards your request to the ISP. The ISP forwards your
request to the company where you are employed, and the company firewall is likely to deny
the request.
19216811.live