19216811.liveSpecify Your Internet Settings
26
Nighthawk
X6 AC3200
Tri-Band
WiFi
Router
Your Internet service provider (ISP) can provide this information. For more information
about IPv6 Internet connection, see the following sections.
-
Use Auto Detect for an IPv6 Internet Connection
on page
26
-
Use Auto Config for an IPv6 Internet Connection
on page
28
-
Set Up an IPv6 6to4 Tunnel Internet Connection
on page
29
-
Set Up an IPv6 Pass Through Internet Connection
on page
31
-
Set Up an IPv6 Fixed Internet Connection
on page
31
-
Set Up an IPv6 DHCP Internet Connection
on page
33
-
Set Up an IPv6 PPPoE Internet Connection
on page
34
6.
Click the
Apply
button.
Your changes take effect.
Requirements for Entering IPv6 Addresses
IPv6 addresses are denoted by eight groups of hexadecimal quartets that are separated by
colons. You can reduce any four-digit group of zeros within an IPv6 address to a single zero
or omit it. The following errors invalidate an IPv6 address:
•
More than eight groups of hexadecimal quartets
•
More than four hexadecimal characters in a quartet
•
More than two colons in a row
Use Auto Detect for an IPv6 Internet Connection
To set up an IPv6 Internet connection through auto detection:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
2.
Type
or
.
A login screen displays.
3.
Enter the router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED > Advanced Setup > IPv6
.
The IPv6 screen displays.
5.
In the
Internet Connection Type
list, select
Auto Detect
.