Control Access to the Internet
50
Nighthawk
X6 AC3200
Tri-Band
WiFi
Router
7.
To add a service that is in the
Service Type
list, select the application or service.
The settings for this service automatically display in the fields.
8.
To add a service or application that is not the list, select
User Defined
.
a.
If you know that the application uses either TCP or UDP, select the appropriate
protocol; otherwise, select
TCP/UDP
(both).
b.
Enter the starting port and ending port numbers.
If the service uses a single port number, enter that number in both fields. To find out
which port numbers the service or application uses, you can contact the publisher of
the application, ask user groups or newsgroups, or search on the Internet.
9.
Select a filtering option:
•
Only This IP Address
. Block services for a single computer.
•
IP Address Range
. Block services for a range of computers with consecutive IP
addresses on your network.
•
All lP Addresses
. Block services for all computers on your network.
10.
Click the
Add
button.
Your changes are saved.
Schedule When to Block Internet Sites and Services
When you schedule blocking, the same schedule is used to block sites and to block services.
For information about how to specify what you want the router to block, see
Use Keywords to
Block Internet Sites
on page
47 and
Block Services from the Internet
on page
48.
To schedule blocking:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
2.
Type
or
.
A login screen displays.
3.
Enter the router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.